Owner's Manual
Table Of Contents
ENGLISH
15
Auto Pairing
When you connect iPhone/iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [
AUTO PAIRING
] is set to [
ON
]. (
18
)
– JVC MUSIC PLAY application is installed on
the Android device (
7
) and [
AUTO MODE
] is
selected (
8
).
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• For
KD-R980BTS
:
The buttons will blink in the color you have selected in [
RING COLOR
]. (
16
)
For
KD-R880BT
:
The buttons will blink in the blinking pattern you have selected in [
RING ILLUMI
]. (
16
)
• The unit answers the call automatically if [
AUTO ANSWER
] is set to a selected time. (
16
)
During a call:
• For
KD-R980BTS
:
The buttons stop blinking and illuminate in the color you have selected in [
RING COLOR
]. (
16
)
For
KD-R880BT
:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume knob.
Press
.
Reject a call
Press and hold
or the
volume knob.
Press and hold
.
End a call
Press and hold
or the
volume knob.
Press and hold
.
BLUETOOTH®
JS_JVC_KD_R980BTS_K_EN_4.indd 15 20/5/2016 2:22:45 PM