CD Receiver Instructions/Installation Manual

19ENGLISH
More about this unit
Basic operations
General
If you turn off the power while listening to
a track, playback will start from where it had
been stopped previously next time you turn
on the power.
If no operation is done for about 60 seconds
after pressing
MENU
button, the operation will
be canceled.
Tuner operations
Storing stations in memory
During SSM search...
All previously stored stations are erased and
the stations are stored anew.
When SSM is over, the station stored in the
lowest preset number will be automatically
tuned in.
When storing a station manually, the
previously preset station is erased when
a new station is stored in the same preset
number.
Disc/USB operations
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD side
of a DualDisc on this product may not be
recommended.
General
This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-
RWs (Rewritable) in audio CD (CD-DA), MP3
and WMA formats.
If you change the source while listening to a
disc, playback stops. Next time you select “CD”
as the playback source, playback will start
from where it had been stopped previously.
When a disc is inserted upside down, “PLEASE”
and “EJECT” appear alternately on the display.
Press
0
to eject the disc.
If the ejected disc is not removed within
15 seconds, it is automatically inserted into
the loading slot again to protect it from dust.
Playback starts automatically.
MP3 and WMA “tracks” (words “file” and “track”
are used interchangeably) are recorded in
“folders.”
While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Playing a CD-R or CD-RW
Use only “finalized” CD-Rs or CD-RWs.
This unit can only play back files of the same
type as those detected first if a disc includes
both audio CD (CD-DA) files and MP3/WMA
files.
This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
Some CD-Rs or CD-RWs may not play back on
this unit because of their disc characteristics,
or for the following reasons:
Discs are dirty or scratched.
Moisture condensation has occurred on the
lens inside the unit.
The pickup lens inside the unit is dirty.
The files on the CD-R/CD-RW are written
using the “Packet Write” method.
There are improper recording conditions
(missing data, etc.) or media conditions
(stained, scratched, warped, etc.).
CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
EN18-25_KD-R516_001A_4.indd 19EN18-25_KD-R516_001A_4.indd 19 12/2/09 12:21:21 PM12/2/09 12:21:21 PM