Operation Manual

7
ENGLISH
Setting the clock
You can also set the clock system to either
24 hours or 12 hours.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 23 and 24.)
2 Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
12
3 Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
12
4 Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
12
5 Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
• During AM and FM non-RDS Station
operation:
• During FM RDS Station operation:
• During CD operation:
• During CD changer operation:
• During external component operation:
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Frequency
Clock
LINE IN
Clock
ClockElapsed playing time
Elapsed playing time
ClockDisc number
Station name
Station frequency
Programme typeClock
EN05-07KD-G302[E_EX_EU]f.p65 10/11/03, 9:12 AM7