KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0252-001A [U/UH] Cover_KD-G116_001A_f.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
2 2 4 4 Sound adjustments ................ 12 Selecting preset sound modes (C-EQ: custom equalizer) .................. 12 Control panel — KD-G116/KD-G115 ............... 5 General settings — PSM ......... 14 How to reset your unit ........................... How to forcibly eject a disc................... How to read this manual........................ How to use the MODE button ............... Parts identification................................. 7 7 Radio operations ...................
ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: How to use the MODE button If you press MODE, the receiver goes into functions mode, then the number buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. Press briefly.
KD-G116/KD-G115 ENGLISH Control panel — Parts identification Display window 1 2 3 4 5 6 7 8 9 p q w e r t y u i +/– buttons DISP (display) button Loading slot Display window MODE button 0 (eject) button ¢/4 buttons (standby/on/attenuator) button SEL (select) button MO (monaural) button SSM (Strong-station Sequential Memory) button CD button FM/AM button RPT (repeat) button RND (random) button EQ (equalizer) button (control panel release) button Number buttons Display window o Tuner reception indicator
ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ To turn off the power You cannot select “CD” as the playback source if there is no disc in the loading slot. Caution on volume setting: ! Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Volume level appears.
Setting the clock 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 ENGLISH Canceling the display demonstrations 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 3 Finish the procedure. 3 To check the current clock time when the receiver is turned off 4 Finish the procedure. To activate the display demonstration In step 3 above...
ENGLISH Radio operations Listening to the radio ~ 2 Select the desired station frequencies. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ When an FM stereo broadcast is hard to receive 1 Start searching for a station. 2 When a station is received, searching stops. To stop searching, press the same button again. Lights up when monaural mode is activated. To tune in to a station manually In step Ÿ above...
2 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting— SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 3 2 Preset number flashes for a while. 3 Listening to a preset station 1 “SSM” flashes, then disappears when automatic presetting is over. 2 Select the preset station (1 – 6) you want. Local FM stations with the strongest signals are searched and stored automatically in the FM band.
ENGLISH Disc operations Playing a disc All tracks will be played repeatedly until you stop playback. To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks Total playing time of Total track number the inserted disc of the inserted disc To the following tracks. To the beginning of the current track, then the previous tracks.
You can lock a disc in the loading slot. To check the current clock time while listening to a disc ENGLISH Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode TRK RPT: RPT OFF: Plays repeatedly The current track. • RPT lights up. Cancels repeat play. Ex.
ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.
You can adjust the sound characteristics to your preference. 1 Indication BAS*1 To do: Adjust the bass. –06 (min.) to +06 (max.) TRE*1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD*2 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the left and right speaker balance. L06 (Left only) to R06 (Right only) LOUD*1 (loudness) Boost low and high frequencies to produce a wellbalanced sound at low volume level.
ENGLISH General settings — PSM Basic procedure 3 Adjust the PSM item selected. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.
When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel ENGLISH Detaching the control panel Detaching the control panel Before detaching the control panel, be sure to turn off the power. 15 EN14-19_KD-G116[U_UH]f.
ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased and stations are stored newly. – Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). – When SSM is over, the station stored in No. 1 will be automatically tuned in.
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms FM/AM Disc playback Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset the receiver (see page 2). • SSM automatic presetting does not work.
AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
EN, TH © 2004 Victor Company of Japan, Limited Rear_KD-G116_001A_f.
KD-G116/KD-G115 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0252-004A 1004DTSMDTJEIN EN, TH [U/UH] ENGLISH This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
‰∑¬ ENGLISH ELECTRICAL CONNECTIONS °“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“ ‡æ◊ËÕªÈÕß°—π°“√‡°‘¥‰øøÈ“≈—¥«ß®√ ¢Õ·π–π”„ÀȪ≈¥¢—È«·∫µ‡µÕ√’Ë≈∫ÕÕ° ·≈È«®÷ßµËÕ “¬‰ø°ËÕ𵑥µ—È߇§√◊ËÕß • µ√«® Õ∫„ÀÈ·πË „®«Ë“‰¥È‡¥‘𠓬¥‘πµËÕ√–À«Ë“߇§√◊ËÕß°—∫µ—«∂—ß √∂¬πµÏ „À¡Ë·≈È«À≈—ß®“°µ‘¥µ—Èß To prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation.
KD-G116/KD-G115 ALAT PENERIMA CD KD-G116/KD-G115 For canceling the display demonstration, see page 7. Untuk membatalkan tampilan demonstrasi, lihat halaman 7. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah. INSTRUCTIONS BUKU PETUNJUK GET0252-003A [UN] Cover_KD-G116_003A_f.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
2 2 4 4 Sound adjustments ................ 12 Selecting preset sound modes (C-EQ: custom equalizer) .................. 12 Control panel — KD-G116/KD-G115 ............... 5 General settings — PSM ......... 14 How to reset your unit ........................... How to forcibly eject a disc................... How to read this manual........................ How to use the MODE button ............... Parts identification................................. 7 7 Radio operations ...................
ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: How to use the MODE button If you press MODE, the receiver goes into functions mode, then the number buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. Press briefly.
KD-G116/KD-G115 ENGLISH Control panel — Parts identification Display window 1 2 3 4 5 6 7 8 9 p q w e r t y u i +/– buttons DISP (display) button Loading slot Display window MODE button 0 (eject) button ¢/4 buttons (standby/on/attenuator) button SEL (select) button MO (monaural) button SSM (Strong-station Sequential Memory) button CD button FM/AM button RPT (repeat) button RND (random) button EQ (equalizer) button (control panel release) button Number buttons Display window o Tuner reception indicator
ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ To turn off the power You cannot select “CD” as the playback source if there is no disc in the loading slot. Caution on volume setting: ! Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Volume level appears.
Setting the clock 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 ENGLISH Canceling the display demonstrations 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 3 Finish the procedure. 3 To check the current clock time when the receiver is turned off 4 Finish the procedure. To activate the display demonstration In step 3 above...
ENGLISH Radio operations Listening to the radio ~ 2 Select the desired station frequencies. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ When an FM stereo broadcast is hard to receive 1 Start searching for a station. 2 When a station is received, searching stops. To stop searching, press the same button again. Lights up when monaural mode is activated. To tune in to a station manually In step Ÿ above...
2 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting— SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 3 2 Preset number flashes for a while. 3 Listening to a preset station 1 “SSM” flashes, then disappears when automatic presetting is over. 2 Select the preset station (1 – 6) you want. Local FM stations with the strongest signals are searched and stored automatically in the FM band.
ENGLISH Disc operations Playing a disc All tracks will be played repeatedly until you stop playback. To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks Total playing time of Total track number the inserted disc of the inserted disc To the following tracks. To the beginning of the current track, then the previous tracks.
You can lock a disc in the loading slot. To check the current clock time while listening to a disc ENGLISH Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode TRK RPT: RPT OFF: Plays repeatedly The current track. • RPT lights up. Cancels repeat play. Ex.
ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.
You can adjust the sound characteristics to your preference. 1 Indication BAS*1 To do: Adjust the bass. –06 (min.) to +06 (max.) TRE*1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD*2 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the left and right speaker balance. L06 (Left only) to R06 (Right only) LOUD*1 (loudness) Boost low and high frequencies to produce a wellbalanced sound at low volume level.
ENGLISH General settings — PSM Basic procedure 3 Adjust the PSM item selected. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.
When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel ENGLISH Detaching the control panel Detaching the control panel Before detaching the control panel, be sure to turn off the power. 15 EN14-19_KD-G116[U_UH]f.
ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased and stations are stored newly. – Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). – When SSM is over, the station stored in No. 1 will be automatically tuned in.
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms FM/AM Disc playback Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset the receiver (see page 2). • SSM automatic presetting does not work.
AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
EN, IN © 2004 Victor Company of Japan, Limited Rear_KD-G116_003A_f.
KD-G116/KD-G115 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0252-006A 1004DTSMDTJEIN EN, IN [UN] ENGLISH INDONESIA This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your Alat penerima ini didisain untuk beroperasi hanya pada 12 V DC, sistem listrik tanah vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC NEGATIVE.
ENGLISH INDONESIA ELECTRICAL CONNECTIONS SAMBUNGAN-SAMBUNGAN LISTRIK To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical co fore installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation. Untuk mencegah hubungan pendek, kami menyarankan anda memutuskan sambungan terminal negatif baterai dan membuat semua sambungan-sambungan listrik sebelum memasang alat penerima.
KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0252-007A [UT] Cover_KD-G116_007A_f.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
2 2 4 4 Sound adjustments ................ 12 Selecting preset sound modes (C-EQ: custom equalizer) .................. 12 Control panel — KD-G116/KD-G115 ............... 5 General settings — PSM ......... 14 How to reset your unit ........................... How to forcibly eject a disc................... How to read this manual........................ How to use the MODE button ............... Parts identification................................. 7 7 Radio operations ...................
ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: How to use the MODE button If you press MODE, the receiver goes into functions mode, then the number buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. Press briefly.
KD-G116/KD-G115 ENGLISH Control panel — Parts identification Display window 1 2 3 4 5 6 7 8 9 p q w e r t y u i +/– buttons DISP (display) button Loading slot Display window MODE button 0 (eject) button ¢/4 buttons (standby/on/attenuator) button SEL (select) button MO (monaural) button SSM (Strong-station Sequential Memory) button CD button FM/AM button RPT (repeat) button RND (random) button EQ (equalizer) button (control panel release) button Number buttons Display window o Tuner reception indicator
ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Ÿ To turn off the power You cannot select “CD” as the playback source if there is no disc in the loading slot. Caution on volume setting: ! Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Volume level appears.
Setting the clock 1 If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 ENGLISH Canceling the display demonstrations 2 Set the hour and minute. 1 Select “CLOCK H” (hour), then adjust the hour. 2 Select “CLOCK M” (minute), then adjust the minute. 3 Finish the procedure. 3 To check the current clock time when the receiver is turned off 4 Finish the procedure. To activate the display demonstration In step 3 above...
ENGLISH Radio operations Listening to the radio ~ 2 Select the desired station frequencies. Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ When an FM stereo broadcast is hard to receive 1 Start searching for a station. 2 When a station is received, searching stops. To stop searching, press the same button again. Lights up when monaural mode is activated. To tune in to a station manually In step Ÿ above...
2 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting— SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 3 2 Preset number flashes for a while. 3 Listening to a preset station 1 “SSM” flashes, then disappears when automatic presetting is over. 2 Select the preset station (1 – 6) you want. Local FM stations with the strongest signals are searched and stored automatically in the FM band.
ENGLISH Disc operations Playing a disc All tracks will be played repeatedly until you stop playback. To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks Total playing time of Total track number the inserted disc of the inserted disc To the following tracks. To the beginning of the current track, then the previous tracks.
You can lock a disc in the loading slot. To check the current clock time while listening to a disc ENGLISH Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode TRK RPT: RPT OFF: Plays repeatedly The current track. • RPT lights up. Cancels repeat play. Ex.
ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.
You can adjust the sound characteristics to your preference. 1 Indication BAS*1 To do: Adjust the bass. –06 (min.) to +06 (max.) TRE*1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD*2 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (balance) Adjust the left and right speaker balance. L06 (Left only) to R06 (Right only) LOUD*1 (loudness) Boost low and high frequencies to produce a wellbalanced sound at low volume level.
ENGLISH General settings — PSM Basic procedure 3 Adjust the PSM item selected. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex.
When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel ENGLISH Detaching the control panel Detaching the control panel Before detaching the control panel, be sure to turn off the power. 15 EN14-19_KD-G116[U_UH]f.
ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... – All previously stored stations are erased and stations are stored newly. – Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). – When SSM is over, the station stored in No. 1 will be automatically tuned in.
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms FM/AM Disc playback Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset the receiver (see page 2). • SSM automatic presetting does not work.
AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
EN, CT © 2004 Victor Company of Japan, Limited Rear_KD-G116_007A_f.
KD-G116/KD-G115 Installation/Connection Manual GET0252-008A 1004DTSMDTJEIN EN, CT [UT] ENGLISH This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Parts list for installation and connection The following parts are provided for this receiver. After checking them, please set them correctly.
ENGLISH ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer.