Manual

Troubleshooting (Continued)

• Set (FOCUS] to [AUTO].

• Clean the lens and check the focus again. 34

• The continuous shooting speed will drop after repeated

continuous shots, depending on the recording media, or

under certain recording conditions.

• Select the recording medium properly.

• To watch images on a TV, set the TV's inpul mode or 19

channel that is appropriate for video playback.

• The temperature ot the camera is increasing. If the

camera continues to heat up, playback may be stopped

to protect the recording medium. In this case, turn off the

power, and then wait until the camera cools down.

• Remove protection from the tiles and delete them. 21

• There is a large number of still images (approx. 1,000 or 20

more] stored in the recording medium. Copy the stored

flies to other devices, and delete them from the recording

medium.

• Push the microSD card in a few more times.

• Another operation is being attempted while a DVD burner

that is turned on is connected. Turn off the camera

connected to the DVD burner, or disconnect the USB

cable.

• Touch the sensors with your finger. The sensors do not 6

function if you touch them with your finger nail or with

gloves on.

Cleaning

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

• To clean the exterior

Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild

soap and wring it out well before wiping. Then wipe again with a dry cloth.

• To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to damage the monitor.

• To clean the lens

Wipe gently with lens cleaning paper.

I I_[o)|_-1

• Avoid using strong cleaning agents such as benzine or alcohol.

• Mold may form if the lens is left dirty.

• When using a cleaner or chemically treated cloth, refer fo the cautions for each product.