INSTRUCTIONS

IFB/RET Monitor... 0
9
CH1(/2)
For configuring the output from the
[PHONE]
terminal
during IFB Return over IP of each channel.
0
Auto:
Outputs upon mixing the IFB/Return over IP
audio with the microphone audio when IFB/
Return over IP audio input is detected. Outputs
only the microphone audio when IFB/Return
over IP audio input is not detected.
0
IFB/RET Only:
Outputs only the IFB/Return over IP audio at all
times.
0
Off:
IFB/Return over IP audio is not output.
[Setting Values: Auto, IFB/RET Only, ROff]
Memo :
0
To enable
different settings for CH1 and CH2 of
[IFB/RET Monitor], configure [PHONE] output to
“Stereo”.
9
IFB/RET Audio ALC
For configuring the audio ALC operation during
IFB/Return over IP.
[Setting Values: ROn, Off]
Memo :
0
[IFB/RET Audio ALC] is an automatic level
adjustment function that enables clear IFB/
Return over IP audio.
9
ALC Level
For setting the IFB/Return over IP audio level
during ALC operation.
0
High:
Automatically adjusts the IFB/Return over IP
audio to maximum sound level.
0
Middle:
Automatically adjusts the IFB/Return over IP
audio to middle sound level.
0
Low:
Automatically adjusts the IFB/Return over IP
audio to low sound level.
[Setting Values: High, RMiddle, Low]
Memo :
0
If the IFB/Return over IP audio is too loud, set
this item to “Low”. If the sound is still loud even
after setting to “Low”, set
[IFB/RET Audio ALC]
to “Off”.
Caution :
The IFB/Return over IP audio may not be audible if
all
the
following conditions are true, please readjust
each setting accordingly.
0
[IFB/RET Audio ALC] is set to “Off”
0
[IFB/RET Monitor]/
[CH1][CH2] is set to “Auto”
0
The audio input of IFB/Return over IP is low
138
A/V Set Menu
Menu Display and Detailed Settings