User's Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
![](/manual/jvc/gy-hc550u/user-s-manual-english-french-portuguese/images/img-237.png)
Symptom Action
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is
[LCD/VF
] B [Display On/Off] B [TC/UB] set to “Off”? To display the
date and time, set it to “On”.
(A
P129 [Display On/Off Item] )
The time is not displayed.
0
The
time
is only displayed on the display screen in the Camera mode
(during shooting).
(A P159 [Display Screen in Camera Mode] )
0
Is [System] B [Record Set] B [Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
(A P
154 [ Time Stamp ] )
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (Z
on the Slave
device is not displayed.)
0
Is the [
TC IN/OUT] switch correctly set?
(A P81 [Synchronizing Time Code on Another Camera] )
0
Set [System]
B [Record Set] B [Record Format] B [WFrame Rate]
such that the two camera recorders have the same frame rate.
(A P151 [WFrame Rate/ GFrame Rate] )
Cannot connect to wireless
LAN.
0
Check the mode of connection and method of setting (
[SSID
] and
[Passphrase] in cases other than WPS).
(A P179
[Wireless LAN connection (“Internal Wireless LAN”A or
“USB”-“Wireless LAN”)] )
0
Even if the Passphrase is wrong,
“Completed the Setup Wizard.
Please Input the Passphrase into Your Device.
” may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation.
0
The network path is congested.
Wait a while before refreshing (reloading) the web browser.
0
Clear the cache in your Web browser.
The clips cannot be uploaded
to the FTP server.
0
Adjust the [Clip Server] settings.
(A P143 [ Clip Server ] )
0
If a file size limit is set in the FTP server, set the size limit such that it
is larger than the maximum size of the recorded clip.
0
Take necessary action as described in “[List of FTP Transfer Errors]
(
A P 232)”.
The wireless LAN is
disconnected.
0
The wireless LAN may be disconnected depending on the
environment. Change the usage environment.
0
Connect via wired LAN.
(A P179 [Wireless LAN connection (“Internal Wireless LAN”A or
“USB”-“Wireless LAN”)] )
The images and audio sound
during live streaming are
choppy.
0
Depending on
the connection method to the network and connection
environment, streaming may not be possible with the encoding bit rate
specified. Please reduce the encoding bit rate.
GPS signal cannot be
received. A L
0
Signal reception from GPS satellites may be affected by buildings or
trees.
Perform
positioning
preferably at an unobstructed location with a clear
view.
0
Radio wave reception may be affected by weather conditions such as
on a cloudy or rainy day.
The position is not accurate.
A L
0
The
precision
error may be up to hundreds of meters if the GPS signal
is weak or reflected off surrounding buildings.
238
Troubleshooting
Others