User's Manual

22
Set Aspect Ratio
1 Press WIDE to display the Wide menu.
2 Press WIDE repeatedly or press or to
scroll through the options, then press OK.
To Select Digital Channels
Press the  rst 3 digits, then press
_
, followed by
the remaining number. Example, to select channel
15-1, press 1, 5,
_
, 1, then press ENT.
To Select by Channel List
All channels with network signal are listed on the
Channel List screen. You can select channels from
this screen.
1 Press ENT to display the Channel List screen.
2 Press or to select a channel number,
then press ENT.
3 Press RETURN to close the Channel List
screen.
Mute Volume
Press MUTE to turn the sound o . To turn the
sound back on, press MUTE again or any of the
VOL buttons.
Set Sleep Timer
Sleep sets the TV to automatically turn o after
a preset amount of time.
After setting a preset amount of time, the TV
will automatically turn o after the timer has
expired.
1 Press SLEEP to display the Sleep screen.
2 Press SLEEP repeatedly or press or to
scroll through the options, then press OK.
To cancel sleep, set the timer to Off.
Display Info
Press INFO to display the channel or input
information on the screen.
Press INFO again to hide the Info screen.
Basic Operations
Normal
When watching a 4:3
content, the TV displays a
standard picture with black
side bars. When viewing a
16:9 content, it displays a
full picture.
Wide
When displaying a 4:3
content, the picture is
stretched horizontally to  ll
the width of the screen. When
watching a 16:9 content, the
image is slightly overscan.
Zoom
The entire picture is uniformly
enlarged to retain its original
proportion. However, some
parts of the picture may be
hidden.
Panoramic
The picture is stretched
horizontally on the left and
right sides to  ll the width of
the screen. The center of the
picture is not stretched.
Stretch
The picture is stretched
horizontally on the left and
right sides.
Note:
• Panoramic mode is only available on 4:3 contents.
• Stretch is only available in 16:9 contents.