User's Manual

Remote Programming

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.

3) Press the P

OWER button on the remote, and see if the cable or satellite box responds.

4) If there was a response, press R

ETURN+/TV. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use

the remote control that came with your equipment.

5) Press RETURN+/TV to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or

“DVD”.

2) Press the VCR or DVD P

OWER and RETURN+/TV buttons. Hold for at least three seconds

and release.

3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4) If there was a response, press RETURN+/TV. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for

the DVD player), and there is no response, use the remote control that came with your

equipment.

5) Press RETURN+/TV to exit.

Search Codes

LCT1928-001A-A ENG 29 8/24/05, 10:10:03 AM

Downloaded from www.Manualslib.com manuals search engine