User's Manual

ManualsBrandsJVC ManualsFlat Panel TVDT-V20L1

INSTRUCTIONS

DT-V24L1D DT-V24L1

DT-V20L1D DT-V20L1

MULTI FORMAT LCD MONITOR

Table of Contents

Safety Precautions .............................................. 2

IMPORTANT SAFEGUARDS ........................... 2

Maintenance ..................................................... 3

Installation ............................................................ 4

Using the monitor on the stand ........................ 4

Installing the monitor in the rack ....................... 5

Daily Operations / Connections ......................... 6

Front panel ....................................................... 6

Rear panel ........................................................ 8

Available signals ............................................... 9

Menu Configuration—MAIN MENU .................. 10

Menu Configuration—SET-UP MENU ............... 12

External Control ................................................. 14

About the external control .............................. 14

Using the MAKE/TRIGGER system

................. 14

Using the serial communication ..................... 15

Troubleshooting ................................................. 16

Self-check program ........................................ 16

Specifications .................................................... 17

General ........................................................... 17

Input/output terminals ..................................... 17

Dimensions ..................................................... 18

The illustration of the monitor is of DT-V24L1D.

LCT2202-001B

DT-V2420L1D_UA_R.indd 1DT-V2420L1D_UA_R.indd 1 06.11.17 10:40:07 AM06.11.17 10:40:07 AM

Summary of content (20 pages)

PAGE 1
DT-V24L1D DT-V24L1 DT-V20L1D DT-V20L1 MULTI FORMAT LCD MONITOR INSTRUCTIONS Table of Contents Safety Precautions .............................................. 2 IMPORTANT SAFEGUARDS ........................... 2 Maintenance ..................................................... 3 Installation............................................................ 4 Using the monitor on the stand ........................ 4 Installing the monitor in the rack ....................... 5 Daily Operations / Connections .....
PAGE 2
Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR FIRE.
PAGE 3
• Before connecting other products such as VCR’s and personal computers, you should turn off the power of this product for protection against electric shock. • Do not use attachments not recommended by the manufacturer as they may be hazardous. • When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or equivalents. Unauthorized substitutions may result in fire, electric shock, or other hazards.
PAGE 4
Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor. • Do not hold the LCD panel when installing the monitor. • Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury. To detach the stand CAUTION • Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel being damaged.
PAGE 5
To adjust the stand height You can select the stand height—higher position or lower position. To change the stand height, change the position of the stand plate as illustrated below after detaching the stand from the monitor. • For detaching the stand, see “To detach the stand” on page 4. 7 Installing the monitor in the rack (DT-V20L1D and DT-V20L1 only) Use a JVC’s RACK MOUNT ADAPTER (RK-C20L1; not supplied). CAUTION • Detach the stand first. • Ask your dealer to install.
PAGE 6
Daily Operations / Connections 7 Front panel DT-V24L1 and DT-V20L1 do not have u, SDI 1 and SDI 2 buttons/lamps (i). Tally lamp NOTE This lamp is controlled by the tally function “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work). of MAKE/TRIG. terminal (☞ “FUNCTION SETTING” on page 12 and “External Control” on page 14).
PAGE 7
Menu Operations 1 Audio Channel Selection (DT-V24L1D and DT-V20L1D only) Display the menu. To display the main menu \ Press MENU button. To display the set-up menu \ Press button while pressing Select audio channels of EMBEDDED AUDIO signals to output from the speakers (L/R) and MONITOR OUT (L/R) terminals. button. 1 About the Status Display The monitor displays the status information below depending on the settings of the menu and buttons at the top of the screen.
PAGE 8
Daily Operations / Connections (cont.) 7 Rear panel DT-V24L1 and DT-V20L1 do not have 9 and p. AC inlet Power input connector. Connect the provided AC power cord to an AC outlet. • Attach the provided power cord holder to prevent accidental disconnection of the AC power cord (☞ the right). Security slot Install a security wire to this slot. CAUTION It is recommended not to use the power cord holder when installing the monitor in a monitor rack etc.
PAGE 9
7 Available signals Specification of DVI-D (HDCP) terminal Connect it to DVI-D output terminal on a personal computer. The following signals are available for this monitor. Video signals Pin No. Input terminal No. Signal name VIDEO (INPUT1, INPUT2) COMPO./RGB (Analog component/ analog RGB) HD/SD SDI (IN 1, IN 2)*1 (DT-V24L1D and DT-V20L1D only) DVI-D (HDCP) (Digital component/digital RGB) Input signal Pin No. Input signal Pin No. Input signal 1 T.M.D.S Data 2– 9 T.M.D.S Data 1– 17 T.M.D.
PAGE 10
Menu Configuration—MAIN MENU For the operation procedure, see page 7. PICTURE IMPROVEMENT Setting for the picture quality To do Item MOVING Reduce the lag of moving pictures which is peculiar to LCD. PICTURE*1 APERTURE FREQ.*2 APERTURE LEVEL*2 CTI*2 LTI*2 sub menu Select the frequency of the luminance signal compensated in OFF, LOW, HIGH “APERTURE LEVEL.” Compensate the frequency response of the luminance signal of the 01 – 10 video signal.
PAGE 11
OTHER SETTING Setting for the “sub menu” and color system Item sub menu POSI. COLOR SYSTEM To do Select the contents and displaying position of “sub menu.” Select the color system. • If the picture is unstable with “AUTO,” select the appropriate color system other than “AUTO.” Setting value ☞ “Technical information” AUTO, NTSC, PAL, SECAM AUDIO SETTING Setting for the audio input/output Item BALANCE Operation guide Shows the buttons for each operation.
PAGE 12
Menu Configuration—SET-UP MENU For the operation procedure, see page 7. FUNCTION SETTING Setting for the tally lamp Item TALLY SELECT TALLY BLINK To do Select the color of the tally lamp on the upper front panel. Select the blinking time of the tally lamp till it gets lighting. Setting value GREEN, RED OFF, 5sec., 8sec. NOTE The tally lamp is controlled using MAKE/TRIG. terminal of REMOTE terminals (☞ “External Control” on page 14). PICTURE SUB ADJ.
PAGE 13
REMOTE SETTING (☞ “External Control” on pages 14 and 15) Setting for the external control Item SERIAL TYPE PARALLEL TYPE PORT F1, PORT F2, PORT F3, PORT F4, PORT F5, PORT F6 Operation guide Shows the buttons for each operation. To do Select the input terminal used for an external control. Select the external control method for MAKE/TRIG. terminal. Assign the control functions to the pins of MAKE/TRIG. terminal (1 to 6) when selecting “SET” in “PARALLEL TYPE.
PAGE 14
External Control 7 About the external control 7 Using the MAKE/TRIGGER system This monitor has three external control terminals. • MAKE/TRIG. terminal : The following external control systems are available. (1) MAKE (make contact system) : Controls the function by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it (☞ the right).
PAGE 15
Operation 1 Set “PARALLEL TYPE” of “REMOTE SETTING” to “MAKE” or “TRIGGER” in the set-up menu. 2 Short-circuit the 7th pin terminal (external control) to the 8th pin terminal (GND) so that the monitor can be controlled by the external control. 3 When selecting “MAKE” (make contact) system: Operate each function by short-circuiting the corresponding pin terminal to the 8th pin terminal (GND) or opening it.
PAGE 16
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult an authorized dealer or service center. Symptom No power supply No picture with the power on No sound “OTHERS” or “Out of range” appears. Probable cause and corrective action • Firmly insert the power plug. • Connect the signal cable firmly. • Turn on the power of the connected component and set the output correctly.
PAGE 17
Specifications 7 General 7 Input/output terminals DT-V24L1D/DT-V24L1 DT-V20L1D/DT-V20L1 Type Multi format LCD monitor Screen size Type 24 wide format Aspect ratio 16:10 LCD panel 24˝ wide, active matrix TFT Effective screen size Width Height Number of pixels displayed 1 920 x 1 200 Number of colors displayed 16.77 million (256 colors for each RGB) Viewing angle (TYP.) 176° (Horizontally), 176° (Vertically) Brightness (at least) (TYP.) 400 cd/m2 Contrast ratio (TYP.
PAGE 18
Specifications (cont.) 7 Dimensions Unit: mm (inch) DT-V24L1D/DT-V24L1 99 (4) 51.9 (2 1/8) 564 (22 1/4) 1.5 (1/16) VESA mounting holes (Size: M4, depth: 10 mm) 160 (6 3/8) 4-ø8 (4-ø5/16) 20 (7/8) 260 (10 1/4) 117 100 145.7 (5 3/4) 408 (16 1/8) 448.6 (17 3/4)*/413.6 (16 3/8)** 100 51 (2 1/8) 243 (9 5/8) 300 (11 7/8) The illustrations of the monitor are of DT-V24L1D.
PAGE 19
DT-V2420L1D_UA_R.indd 19 06.11.
PAGE 20
DT-V24L1D/DT-V24L1/DT-V20L1D/DT-V20L1 © 2006 Victor Company of Japan, Limited DT-V2420L1D_UA_R.indd 20 MULTI FORMAT LCD MONITOR 1106MKH-MW-VP 06.11.