User Manual

5
EN
Caution for use of the product for many hours
In the case that you use the monitor for many hours, we recommend that you set “No Sync Action” in “Sync Function” to “Power Save” in
Main Menu. This will reduce power consumption and relieve strain on the monitor. To reduce damage to the LCD panel, using the LCD
Saver function is recommended.
Caution for use of the product in the high temperature
Do not use the product in places of high temperature; otherwise, parts of this product or the LCD panel may be damaged. This product is
equipped with a temperature sensor to give warning if the temperature becomes too high. If the temperature exceeds the range of normal
use, “Temp. Over” is displayed, and the power is turned off automatically if the temperature becomes any higher. In this case, move the
product to a place of low temperature to let it cool down.
Maintenance
Unplug this product from the wall outlet before cleaning.
LCD panel
To avoid irreparable change in appearance of the screen such
as uneven color, discoloration, scratches, be careful about the
following:
● Do not paste or stick anything using any glues or adhesive
tapes.
● Do not write anything on the screen.
● Do not strike the screen with a hard object.
● Avoid condensation on the screen.
● Do not wipe the screen with any liquid such as water. In
addition, wiping the screen with water-diluted neutral
detergent or solvent such as alcohol, thinner, or benzine may
affect the anti-reflection treatment of the screen.
● Do not wipe the screen forcefully.
Wipe stains off the LCD panel with a soft cloth. If the screen gets
heavily stained, wipe it with a soft cloth soaked in water-diluted
neutral detergent and wrung well, then wipe with a soft dry cloth.
Cabinet
To avoid the deterioration or damages of the cabinet such as its
paint’s peeling away, be careful about the following:
● Do not wipe the cabinet using solvent such as alcohol, thinner,
or benzine.
● Do not expose the cabinet to any volatile substance such as
insecticides.
● Do not allow any rubber or plastic in contact for a long time.
● Do not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets
heavily stained, wipe it with a soft cloth soaked in water-diluted
neutral detergent and wrung well, then wipe with a soft dry cloth.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all
the openings). If a vacuum cleaner is not available, use a cloth and
wipe it off. Leaving the dust around the intakes may prevent proper
temperature control and cause damage to the product.
The LCD panel and backlight have life expectancy. Due to the basic characteristics of the LCD panel, an afterimage or uneven display
may occur. It is recommended that you change images occasionally, activate the power saving function, or often turn off the power to
reduce the load on the LCD panel. Continuous operations of the LCD panel may accelerate the deterioration.
Operating Precautions
Safety Precautions.......................................2
IMPORTANT SAFEGUARDS 2
Operating Precautions .............................. 5
Caution for use of the product for many hours 5
Caution for use of the product in the high temperature 5
Maintenance 5
Installation ......................................................6
Index of Parts and Functions ....................8
Rear panel 8
Front panel 10
Showing Input Signals .............................11
Volume Adjustment/Audio Channel Selection 11
On the Information Display 11
On the Status Display 11
Menu Configuration ................................. 12
First Time Installation 12
The operation procedure 12
Menu Transition Diagram 13
Main Menu 14
Set-Up Menu 18
External Control .........................................22
About the external control 22
Using the Make/Trigger system 22
Using the serial communication 23
Troubleshooting ........................................25
Self-check program 26
Specifications ..............................................27
General 27
LCD panel 27
Input/output terminals 27
Dimensions 28
Available signals 29
Table of Contents
DT-E15L4_EN.indb 5DT-E15L4_EN.indb 5 10/31/2012 9:55:04 PM10/31/2012 9:55:04 PM