SUPER PROJECTOR INSTRUCTIONS DLA-M5000LU DLA-M5000SCU For customer Use: Enter below the Serial No. which is located on the side panel of the cabinet. Retain this information for future reference. QUICK ALIGN. OPERATE AV HIDE PAGE BACK PRESET LENS LOCK UNLOCK EN TE R Model No. ME NU / RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS W – D LENS Serial No. M5000LU/SCU Cover RM-M4100G REMOTE CONTROL UNIT 3 01.3.
Thank you for purchasing this projector. Before using it, read and follow all instructions carefully to take full advantage of the projector's capabilities. SAFETY PRECAUTIONS IMPORTANT INFORMATION WARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. This projector is equipped with a 3-blade grounding-type plug to satisfy FCC rule.
SAFETY PRECAUTIONS (Cont.) – This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. – The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat. – This product is equipped with a three-wire plug.
Contents SAFETY PRECAUTIONS ........................... 2 Operating the Setting Menu ................... 30 Accessories ............................................... 5 Making Basic Settings ......................................... 30 Controls and Features .............................. 6 Front Side / Top Surface / Right Side .................... 6 Left-hand side / Back Side .................................... 7 Control Panel ........................................................
Accessories The following accessories are included with this projector. Check for them; if any item is missing, please contact your dealer. Remote control unit (RM-M4000G) AA/R6-size dry cell battery (×2) (for checking operation) Power code [approx. 3.35 m (11 ft)] Remote control cable [approx. 15 m (49.2 ft)] Information on separately sold items • Projection lens GL-M4023SZ GL-M4015S • Video board PK-G1101D 3 : 1~7 : 1 zoom lens 1.
Controls and Features Front Side / Top Surface / Right Side 1 1 2 3 7 4 6 5 4 AC IN (power input) terminal 1 Adjustable foot It is set at the shortest position when shipped from the factory. Turn the foot to make the projector level. Adjustment can be made in the range of ±4° from the vertical and ±5° from the horizontal. 2 1 Connector panel For details, refer to “Connector Panel” on page 10. 3 Air intake area (filter) Air is taken in through this area to cool the light-source lamp.
Controls and Features (cont.) Left-hand side / Back Side p 9 8 3 8 q 8 Exhaust vents Vents for cooling fans through which warm air comes out. 9 Control panel For details, refer to “Control Panel” (page 8 and 9). p Remote sensor When operating with the remote control, aim it toward this sensor. An additional remote sensor is provided on the front of the projector. The effective operating distance of the remote control is 10 m from each of the sensors.
Controls and Features (cont.) Control Panel 1 2 STAND BY 3 4 5 6 OPERATE LAMP TEMP EMERGENCY 1 STAND BY Indicator ON : When in stand-by mode. Blinking : When in cool-down mode. CAUTIONS 7 8 9 p AV RGB SETTING QUICK ALIGN. 6 EMERGENCY indicator Blinking: Something abnormal has occurred with the projector. Memo • The cool-down mode continues for about 20 seconds, during which projection cannot–be started again.
Controls and Features (cont.) Control Panel (Cont.) 1 2 STAND BY 3 4 5 6 OPERATE LAMP TEMP EMERGENCY 7 AV button 7 8 9 p AV RGB SETTING QUICK ALIGN. p QUICK ALIGN. button Use this button to select a device such as a video deck connected to the EXT. IN terminal of the projector. Each time you press the button, the device selected changes as follows: Y/C* VIDEO* YPBPR * Y/C and VIDEO can be used only when a video board separately sold has been installed.
Controls and Features (cont.) Connector Panel 8 RGB 2 Y/C VIDEO RGB IN-1 R 7 1 RGB IN-2 EXT. IN Y G H/CS PB/B-Y B V PR/R-Y 3 REMOTE CONTROL RGB OUT RS-232C 6 5 1 Y/C (S video) input terminal (Mini DIN 4 pin) Connect this terminal to the S video output terminal of a video deck, etc. * This terminal can be used if a video board (PK-G1101D) sold separately has been installed. The terminal was not provided when the projector was shipped from the factory.
Controls and Features (Cont.) Remote Control Unit 1 r e 3 ME NU / R TE 9 2 PAGE BACK PRESET EN p OPERATE AV HIDE LENS LOCK UNLOCK w q QUICK ALIGN. RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS W – D 4 5 6 LENS 8 7 1 Remote control’s signal transmitter 6 FOCUS (+/–) button 2 OPERATE button To turn on or off the power, press this button for one or more seconds. * About 30 seconds after the power has turned on, video image will appear on the screen.
Controls and Features (Cont.) Remote Control Unit 1 r e q QUICK ALIGN. OPERATE AV HIDE PRESET w 2 PAGE BACK QUICK ALIGN. EN ME NU / PAGE BACK ME NU / EN TE R TE R 4 OPERATE AV HIDE PRESET LENS LOCK UNLOCK LENS LOCK UNLOCK 3 RGB/COMPUTER AV RGB/COMPUTER AV p 9 U T + SHIFT ZOOM FOCUS W – D 5 U T + SHIFT ZOOM FOCUS D W – 6 LENS + VOLUME LENS – t 8 7 p AV button e QUICK ALIGN.
Controls and Features (cont.) MENU / ENTER (Menu Operation) Button The remote control supplied with this projector has only one button to navigate through the menus. Pressing the menu operation button too strongly may cause an incorrect operation. So, before you use the button in an actual situation, have some practice to make yourself familiar with using the button.
Installing the Projector Precautions for Installation CAUTIONS • Since the projector weighs approx. 70 kg (154 lbs.), be sure to use four or more people when lifting or moving it; otherwise, the projector could possibly drop, causing personal injury and/or damage to the projector. • Do not install the projector in the following places : • There is much water, humidity or dust. • The projector may be subjected to oil smoke or cigarette smoke. • On a soft surface such as a carpet or cushion.
,, Installing the Projector (Cont.) Precautions for Installation (Cont.) ■ Observe the following points when installing the projector by hanging it from the ceiling • To prevent falling or overturning, it is recommended that the projector be fixed to its stand with bolts. • When mounting the projector to the ceiling, first install a special shelf and then set the projector on it securely.
Installing the Projector (Cont.) Lens Shift Function ■ Change of projection screen according to aspect ratio Screen with 4 : 3 aspect ratio Screen Screen with 16 : 9 aspect ratio 90° 90° 90° Center line of the lens Install the projector so the center of the projection screen is the same height as the center of the lens. The separately sold lenses used on the projector have a lens shift function.
Installing the Projector (Cont.) Lens Shift Function (Cont.) Py(%) Maximum amount of shift The maximum amount of vertical shift is restricted by the amount of horizontal shift made. Vertical screen size The amount of shift is defined as follows: (y): 100% With the screen width taken as 1, horizontal shift is defined as a ratio (%) of the screen width, while with the screen height taken as 1, vertical shift is defined as a ratio (%) of the screen height.
Installing the Projector (Cont.) Projection Distances and Screen Sizes Lenses that can be used are a 3 : 1 ~ 7 : 1 zoom lens and a 1.5 : 1 fixed-focus lens. With a zoom lens used, you have a wider latitude in selecting projection distance and installation space than with a fixed lens. For how to install the lens, consult the dealer who installed and adjusted your projector or service center. Relationship of screen size vs.
Connecting to Various Devices * Before connection, be sure to turn off the projector and connected devices. * Read the manual which comes with each device thoroughly. Signals that Can Be Input to the Projector The following signals can be input to the projector: ■ Video signals (1) Response to color systems Color system Input terminal NTSC 480i NTSC 4.
Connecting to Various Devices (Cont.) Examples of System Configuration Before connection, be sure to turn off both the projector and the equipment to be connected. • Also, read the manuals which came with the equipment. Example of a basic system • By connecting an RGB switcher, a variety of input sources can be input to the projector as RGB signals. Using the remote control supplied, you can select the channel for an input source and project an image optimal to the source.
Connecting to Various Devices (Cont.) Connecting to Computer Devices Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly. • Use the separately available computer connection cable. Also, prepare cables required for connecting the devices connected. • Desktop type To RGB IN-1 Computer cable (separately available) Y/C RGB RGB IN-1 To R R To monitor connector RGB IN-2 EXT.
Connecting to Various Devices (Cont.) Connecting to Devices which Control the Projector Before connection, be sure to turn off both the projector and devices to be connected. • Read the manual thoroughly which comes with each device to be connected. • By connecting a computer to the RS-232C terminal, you can control the projector. * For details, consult an authorized your dealer or service center.
Connecting to Various Devices (Cont.) Connecting the Power Cord (Supplied) After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet. 1 Insert the supplied power cord into the power input terminal (AC IN ~) of the projector. 1. Remove the power input terminal cover. The cover is a screwed type. Turn the cover in the direction of the arrow to remove.
Connecting to Various Devices (Cont.) When Turning On the Devices Connected to the Projector Turn on the switches of the projector and the devices connected in the following order. Skip over unconnected devices if there is any. Power switch of the monitor of the computer which provides input to the projector Peripheral devices of the computer which provides input to the projector (Hard disk, magneto optical disk, scanner, etc.
Basic Operations ■ Projector’s buttons The following describes the basic procedure for normal use of the projector. STAND BY indicator 1. Turning on the Power OPERATE indicator 1 Turn on the MAIN POWER switch of the projector. ON [ ❙ ]:The main power turns on and the STAND BY indicator comes on. Projector’s indicator STAND BY OPERATE LAMP TEMP EMERGENCY OPERATE button MAIN POWER switch AV RGB 2, 1 1, 2 STAND BY 2 Press the OPERATE button for one second or more.
Basic Operations (Cont.) ■ Projector’s buttons 2. Select the video input to be projected AV button ■ Press the AV button or the RGB button to switch the input. • Each time you press either button, the selected input changes as follows. ■ When you press VIDEO: LAMP TEMP EMERGENCY RGB AV SETTING Y/C QU AL RGB button VIDEO YPBPR ■ When you press COMPUTER: RGB 1 RGB 2 Screen display YPBPR CH: 1 HDTV(1080i) ■ Remote control unit LENS LOCKÔ UNLOCK switch QUICK ALIGN.
Basic Operations (Cont.) ■ Projector’s buttons 4. Adjust focus ■ Adjust focus with the remote control’s FOCUS (+/–) buttons. When adjusting the focus with the FOCUS buttons, set the LENS LOCKÔUNLOCK switch to the UNLOCK position. MERGENCY RGB AV SETTING QUICK ALIGN. Remote control unit + FOCUS QUICK ALIGN. button – Note • Focus adjustment can also be made on the setting menu. For operating the setting menu, refer to “Making Basic Settings” on page 30.
Basic Operations (Cont.) ■ To display the SETTING menu The setting menu is used to make basic adjustments and settings (TRACKING, PHASE, H. POS., V. POS., FOCUS and ZOOM) of the video picture being projected after installation (connection) or after inputs are switched. For operating the setting menu, refer to “Making Basic Settings” on page 30. ■ Projector’s button TEMP EMERGENCY RGB AV SETTING QUICK ALIGN. • Press the projector’s SETTING button. The setting menu is displayed on the screen.
Basic Operations (Cont.) ■ To display “CHANNEL” on the screen ■ Remote control unit AV HIDE button QUICK ALIGN. OPERATE AV HIDE PAGE BACK PRESET PAGE BACK button LENS LOCK UNLOCK EN ME NU / While no menu is displayed, pressing the PAGE BACK button causes the channel now being used to appear. You can also switch channels. For details, refer to “Switching Channels with a Direct Channel” on page 52. • While no menu is displayed, press PAGE BACK on the remote control. The channel appears on the screen.
Operating the Setting Menu Making Basic Settings In this section, we are making basic picture adjustments which should be performed after installation (connection). ■ Projector’s buttons SETTING button Notes MERGENCY AV RGB SETTING QUICK ALIGN. QUICK ALIGN. button ■ Setting menu the SETTING button of the 1 Press projector. • The setting menu is displayed on the screen. the SETTING button to 2 Press select the desired item. SETTING TRACKING PHASE H.POS. V.POS.
Operating the Main Menu Configuration the Main Menu (AV Input) For computer inputs, see the following page. You can adjust video quality (PICTURE) and etc. using the menus. The menus are configured as follows: Main menu (AV inputs : During EXT. IN input signal) PIXEL CLOCK TRACKING PHASE : Normally, no adjustment is required. The lateral size and display area of video image are adjusted. : Normally, no adjustment is required. Flickering or dim video image is adjusted. POSITION V. POS. H. POS.
Operating the Main Menu (Cont.) Configuration of the Main Menu (Computer-related input) Main menu (Computer-related inputs : During COMPUTER IN-1 or -2 input signal) PIXEL CLOCK TRACKING PHASE : The lateral size and display area of video image are adjusted. : Flickering or dim video image is adjusted. POSITION V. POS. H. POS. : The vertical position of the video image being projected is adjusted. : The horizontal position of the video image being projected is adjusted.
Operating the Main Menu (Cont.) Operating the Main Menu (Basic Operation of the Main Menu) ■ Remote control unit QUICK ALIGN. For projector’s menus, the setting menu and the main menu are available. Here, we explain about the operation of the main menu. For the setting menu, refer to “Making Basic Settings” on page 30. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK 1 Press the MENU/ENTER button. EN ME NU / R TE • The main menu is displayed on the screen.
Operating the Main Menu (Cont.) Changing the Color System ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK 1 Press the MENU/ENTER button. ME NU / EN • The main menu is shown on the screen. R TE MENU/ENTER button RGB/COMPUTER AV MENU/ENTER toward the 5 or ∞ 2 Press mark to select “DECODER”. • The selected item (displayed in text) is shown in magenta color on the screen.
Operating the Main Menu (Cont.) Changing the Language Display ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button The language in the menu display is set to English when shipped from the factory. When you want to change to another language, set it as follows. LENS LOCK UNLOCK 1 Press the MENU/ENTER button. • The main menu is shown on the screen.
Operating the Main Menu (Cont.) Adjusting the Pixel Clock ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / The pixel clock should be adjusted mainly for computer-related inputs. (Normally, it does not need to be adjusted for video inputs.) If a wide stripe appears on the screen, adjust the lateral size of video image and the display area (tracking adjustment) so the stripe disappears.
Operating the Main Menu (Cont.) Adjusting the Screen Position ■ Remote control unit QUICK ALIGN. 1 Press the MENU/ENTER button. OPERATE AV HIDE PRESET • The main menu appears on the screen. PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button U T + SHIFT ZOOM FOCUS W – D MENU/ENTER toward the 5 or ∞ 2 Press mark to select a submenu item, “POSITION”. • The selected item (displayed in text) is shown in magenta color on the screen.
Operating the Main Menu (Cont.) Adjusting Picture Quality ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button Adjust brightness, contrast, etc. so you have the desired screen. Adjustment items (on the PICTURE menu) are different when videorelated signals are input and when computer-related signals are input. LENS LOCK UNLOCK 1 Press the MENU/ENTER button. • The main menu appears on the screen. EN ME NU / R TE MENU/ENTER button “PICTURE”.
Operating the Main Menu (Cont.) Adjusting Picture Quality (Cont.) ■Remote control unit QUICK ALIGN. Press MENU/ENTER toward the 2 or 3 5 mark to adjust the selected item. OPERATE AV HIDE PRESET ■ For video system input PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS D W – • To adjust multiple items, repeat steps 4 and 5.
Operating the Main Menu (Cont.) Adjusting Picture Quality (Cont.) ■Remote control unit QUICK ALIGN. Adjustment item Button OPERATE PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE RGB/COMPUTER U T + SHIFT ZOOM FOCUS D W – Gets darker. (–30 ← 0 ← +30) 3 Gets brighter. (–30 → 0 → +30) 2 Gets lower. (–30 ← 0 ← +30) 3 Gets higher. (–30 → 0 → +30) 2 Gets less reddish. (–30 ← 0 ← +30) 3 Gets more reddish. (–30 → 0 → +30) 2 Gets less greenish.
Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK ME NU / EN Memo R TE MENU/ENTER button RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS W – D The following optional functions can be set (adjusted). • MENU AUTO OFF • LINE DISPLAY • RIGHT LEFT REV. • TOP BOTTOM INV.
Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) ■Remote control unit QUICK ALIGN. OPERATE • To adjust multiple items, repeat steps 4 and 5. AV HIDE PRESET PAGE BACK Press MENU/ENTER toward the 2 or 3 5 mark to select an item to set (adjust). PAGE BACK button Adjustment item Button LENS LOCK UNLOCK 2/3 2/3 Sets whether to show the line display (Y/C, VIDEO, etc.) at the top of the projected screen or not.
Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) ■Remote control unit QUICK ALIGN. Adjustment item Button OPERATE AV HIDE BACK COLOR PRESET PAGE BACK 2/3 LENS LOCK UNLOCK YELLOW EN 2/3 Sets the vertical-to-horizontal ratio (4 : 3 or 16 : 9) of the video image projected. (Factory setting : 4 : 3) 4 : 3 : The aspect ratio of the screen becomes 4 : 3. Set it to 4 : 3 for video of NTSC, NTSC4.43, PAL, SECAM. 16 : 9: The aspect ratio of the screen becomes 16 : 9.
Operating the Main Menu (Cont.) Changing (Setting) the Source ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button RGB/COMPUTER AV Input mode Factory setting Input mode Factory setting VIDEO NTSC(480i) RGB 1 AUTO Y/C NTSC(480i) RGB 2 AUTO YPBPR AUTO — — Notes U T + SHIFT ZOOM FOCUS W – D Normally, use the source setting in AUTO.
Operating the Main Menu (Cont.) Changing (Setting) the Source (Cont.) ■ Remote control unit QUICK ALIGN. OPERATE 5 Press MENU/ENTER to set (fix). AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button Under “SOURCE” shown at the top of the screen, AUTO is displayed in ( ), and the menu will automatically be cleared, finishing the setting procedure. Then, information on the input source will be shown for about 5 seconds.
Operating the Main Menu (Cont.) Changing (Setting) the Source (Cont.) ■ Remote control unit ■ When a source setting “USER” is selected: The “USER SOURCE setup menu” is displayed. QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE • On the “USER SOURCE setup menu (user)”, a source created by the user can be selected. •To select a user area, it must already be user-registered with the “USER SOURCE setup menu”. (See pages 54 to 56.
Operating the Main Menu (Cont.) Setting Up Channels ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button When you set up channels, you can select a line and a multiple of sources (up to 30) for each channel. If you are using a switcher and set switcher numbers, you can also select each channel from the switcher side.
Operating the Main Menu (Cont.) Setting Up Channels (LINE setup) ■ Remote control unit ■ When LINE is selected: The “LINE selection menu” screen appears. QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK LINE ME NU / EN Y/C VIDEO YPBPR RGB1 RGB2 R TE MENU/ENTER button NONE RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS D W – (LINE selection menu) LENS MENU/ENTER toward the 5 or ∞ 1 Press mark to select a line from the “LINE” items.
Operating the Main Menu (Cont.) Setting Up Channels (SOURCE setup) ■ Remote control unit ■ When “SOURCE” is selected : The “SOURCE registration” screen appears. QUICK ALIGN. • To be able to display a menu, a “LINE” needs to be already registered. • Sources already selected are indicated with check marks.
Operating the Main Menu (Cont.) Setting Up Channels (SOURCE setup) (Cont.) ■ Remote control unit QUICK ALIGN. 2.Press the MENU/ENTER button. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / • When the item is set, a check mark is placed next to its user name, which is registered as a “SOURCE”.
Operating the Main Menu (Cont.) Setting Up Channels (SWNo. setup) ■ Remote control unit ■ When a switcher number “SWNo” is selected : The “Switcher number setup menu” is displayed. QUICK ALIGN. • To be able to display a menu, a “SOURCE” needs to be already set. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK SWITCHER EN ME NU / R TE SWITCHER NO. 1 MENU/ENTER button RGB/COMPUTER AV U T + SHIFT ZOOM FOCUS W – D (SWITCHER No.
Operating the Main Menu (Cont.) Changing Channels (CH Change) ■ Remote control unit QUICK ALIGN. OPERATE Channels which have lines and sources registered can be switched. The channels can be switched by using either a direct channel or the “CHANNEL setup • selection” menu. AV HIDE PRESET PAGE BACK LENS LOCK UNLOCK PAGE BACK button ■ To switch channels using a “DIRECT CHANNEL” MENU/ENTER button PAGE BACK while no menu is 1 Press displayed. EN ME NU / R TE • A channel No.
Operating the Main Menu (Cont.) Changing Channels (CH Change) (Cont.) ■ Remote control unit QUICK ALIGN. ■ To switch on the “CHANNEL setup • selection” menu : OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK 1 Press the MENU/ENTER button. • The main menu appears on the screen. EN ME NU / R TE MENU/ENTER button “CHANNEL”. RGB/COMPUTER AV MENU/ENTER toward the 5 or ∞ 2 Press mark to select a submenu item, • The selected item (text display) is shown in magenta color.
Operating the Main Menu (Cont.) Setting Up (or Changing) User Sources ■ Remote control unit QUICK ALIGN. A maximum of 10 types of information can individually be registered regarding the source being input and projected through the line connection.
Operating the Main Menu (Cont.) Setting Up (or Changing) User Sources (Cont.) ■ Remote control unit QUICK ALIGN. To change the registered user source name. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button 1 Press the MENU/ENTER button. • The main menu appears on the screen. MENU/ENTER toward the 5 or ∞ 2 Press mark to select a submenu item, “USER SOURCE SETUP”. • The selected item (text display) is shown in magenta color.
Operating the Main Menu (Cont.) Setting Up (or Changing) User Sources (Cont.) ■ Remote control unit 6 Press the MENU/ENTER button to set. • The “USER NAME setup menu” is displayed. QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button USER NAME LENS LOCK UNLOCK ME NU / EN 777777777 R TE MENU/ENTER button RGB/COMPUTER AV (USER NAME setup menu) U T + SHIFT ZOOM FOCUS W – D 1. Press MENU/ENTER toward the 2 or 3 mark to select positions where to enter characters.
Operating the Main Menu (Cont.) Setting Up (or Changing) the Display Size ■ Remote control unit QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button • Display size setup cannot be performed for signals of NTSC (480i), 480p, PAL, HDTV (1035i/1080i) or 720p. • Do not perform display size setup if the display size of the equipment that is feeding input signal is not known.
Operating the Main Menu (Cont.) Setting Up (or Changing) the Display Size (Cont.) ■ Remote control unit QUICK ALIGN. QUICK ALIGN. button OPERATE AV HIDE PRESET 7 Press QUICK ALIGN. PAGE BACK PAGE BACK button LENS LOCK UNLOCK EN ME NU / R TE MENU/ENTER button U T + SHIFT ZOOM FOCUS D W – finishing step 7, press the MENU/ 8 After ENTER button. • The main menu appears on the screen. Press MENU/ENTER toward the 5 or ∞ 9 mark to select “DISPLAY SIZE”.
Filter Maintenance and Light-Source Lamp Replacement Cleaning and Replacing the Filter The filters should be cleaned periodically. If they are heavily stained, do not become clean if cleaned, or are damaged, replace them with new filters (Parts number: LC30505); otherwise, dirt and dust may get inside, possibly causing an adverse effect on the screen and preventing you from enjoying clear pictures. ■ The projector has two filters installed, one on the right side and the other on the back.
Filter Maintenance and Light-Source Lamp Replacement (Cont.) Cleaning and Replacing the Filter (Cont.) 4 Clean the filters. Wash the filter in water with neutral detergent, and dry it in the shade. 5 Reinstall the filters. To reinstall the filters to the projector, reverse the procedure for removing . Finally, be sure to reinstall the filter covers. Notes • Install the filters correctly; otherwise the projector will not operate normally.
Troubleshooting Solutions to common problems related to your projector are described here. If none of the solutions presented here solves the problem, unplug the projector and consult a authorized dealer or service center. Symptom Probable cause Power is not supplied. • Is the power cord disconnected? Corrective action • Insert the power cord (plug) firmly. 23 • Is the main power switch turned on? • Turn on the MAIN POWER switch.
Troubleshooting (Cont.) Symptom Probable cause During video replay, video image sometimes is disturbed • have Installation adjustment been performed? Image color is poor or • Is picture quality (color desity, etc.) image is disturbed adjusted correctly? • Is the correct broadcast system (color system) selected? Corrective action • For installation, consult the dealer where you purchased the projector or a local service center. • Adjust picture quality on the menu.
Troubleshooting (Cont.) Symptom Probable cause Lens shift adjustment • Is the shift center lock pin for shipment is not possible. left attached? Remote control unit does not work. • Are batteries installed correctly? • Are batteries exhausted? Corrective action • Remove the shift center lock pin, and then make adjustments. (For how to remove the shift center lock pin, consult the dealer where you purchased the projector or a local service center.
Specifications Optical mechanism system • Projection method • D-ILA device • Projecting lens (separately available) • Screen size • Light-source lamp 3D-ILA device, 1 lens, 3 primary color optical shutter method 0.9" measured diagonally (1365 pixels ×1024 pixels) × 3 (Total number of pixels : 4,193,280) GL-M4023SZ 3:1~7:1 zoom lens GL-M4015S 1.5:1 fixed focus lens 60" to 300" [recommended] to 600" [maximum] measured diagonally (*with aspect ratio : 4 : 3) 1.
Specifications (Cont.) Horizontal sync/composite sync signal (H/Cs) H : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) Cs : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) Vertical sync signal (V) V : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) * Some connected devices may not correspond to composite sync (Cs) or G on sync signal. [RGB OUT (RGB OUTPUT)] • RGB OUT 1-line, D-sub 3-row 15-pin × 1 Analog RGB signal R : 0.7V(p-p), 75Ω B : 0.
Specifications (Cont.) Outside dimensions ■ Top Unit: mm (inch) 30 (1-3/16) 688 (27-1/8) 30 (1-3/16) 687 (27-1/16) 747 (29-7/16) ■ Front ■ Side 720 (28-3/8) 793 (31-1/4) 42 (1-11/16) 42 (1-11/16) 18 (3/4) 18 (3/4) 59 (2-3/8) ~ 368 (14-1/2) 420 (16-9/16) Y/C RGB 230 (9-1/16) VIDEO RGB IN-1 R RGB IN-2 EXT.
Specifications (Cont.
DLA-M5000LU/DLA-M5000SCU SUPER PROJECTOR VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan LCT0978-001A 0301-I-JVC-VP © 2001 VICTOR COMPANY OF JAPAN, LIMITED M5000LU/SCU Cover 2 01.3.