User's Manual

67
* Default values are indicated in bold characters.
Item Setting Values Function
Clip Review
Last 5 sec
Top 5 sec
CLIP
For specifying the operation when any of the [USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/
[ZEBRA/5]/[REC/6] buttons is set to AClip ReviewB.
Last 5 sec : Views about 5 seconds of the clip from the ending.
Top 5 sec : Views about 5 seconds of the clip from the beginning.
CLIP : Views the entire clip.
Memo :
● This item is selectable when any of the [USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/[ZEBRA/
5]/[REC/6] buttons is set to AClip ReviewB.
Camera Process Menu
Item Setting Values Function
Detail
Max, 9 to 1,
Normal,
-1 to -9, Min, Off
For adjusting the contour (detail) enhancement level.
Increase the number : Sharpens the contour.
Decrease the number : Softens the contour.
Off : Disables this function.
V/H Balance
H-Max, 4 to1,
Normal,
-1 to -4, H-Min
For setting the H/V balance to enhance contour (detail) in the horizontal (H) or vertical (V)
direction.
Increase the number : Enhances contour in the horizontal direction.
Decrease the number : Enhances contour in the vertical direction.
Knee
Manual
Auto
For specifying the AKneeB operation, which compresses video signals beyond a certain level to
show the gradation of the highlighted portion. To check the gradation of a bright area, set to
AManualB and adjust the knee point manually.
Manual : Enables manual adjustment of the knee point (starting point of knee operation) using
ALevelB.
Auto : Adjusts the knee point (starting point of knee operation) automatically according to the
luminance level.
Level
100%
95%, 90%, 85%
For setting the starting point of knee compression (knee point).
Increase the number : Increases the knee point level.
Decrease the number : Decreases the knee point level.
Memo :
● When [Knee] is set to AAutoB, this item appears as A---B and cannot be selected.
Gamma
Cinema
Standard
Off
For adjusting the gamma curve that determines the gradation expression.
Cinema : Sets to a gamma curve with similar gradation to the screen characteristics of movies.
Standard : Sets to a standard gamma curve.
Off : Disables gamma curve adjustment.
Level
Max, 4 to1,
Normal,
-1 to -4, Min
This item can be specified separately when [Gamma] is set to AStandardB or ACinemaB.
Increase the number : Enhances the gradation of black. However, the gradation of bright areas
deteriorates.
Decrease the number: Enhances the gradation of bright areas. However, the gradation of black
deteriorates.
Memo :
● When [Gamma] is set to AOffB, this item appears as A---B and cannot be selected.
GY-HM150U.book Page 67 Monday, September 5, 2011 1:48 AM