User's Manual
44
Shooting
1
Set [Slot Mode] in the [Main Menu]
B
[Record Set] menu to
A
Backup
B
. (
A
Page 64)
A ABACKUPB display appears on the status display screen.
2 Start backup recording. (Backup recording in slot B)
●
Select [REC] in [Main Menu]
B
[Record Set]
B
[Backup Rec]
and press the center of the set lever. (
A
Page 64)
(You can also press the user button that is assigned with
ABackup TrigB. (A Page 66))
●
Backup recording into slot B starts. (The characters
A
BACKUP
B
appear in red.)
●
The card slot mark of slot B turns red (selected state), and
the status indicator of slot B also blinks in green.
3 Start normal recording. (Normal recording in slot A)
●
Press any of the [REC] buttons.
●
Recording into the media in slot A starts. (The characters
A
REC
B
appear in red.)
●
The card icon of slot A turns red (unselected state), and the
status indicator of slot A also blinks in green.
4 Stop normal recording.
●
Press any of the [REC] buttons again.
●
Recording to slot A stops, and the card slot mark of slot A
turns white (unselected state).
●
The characters
A
REC
B
(red) changes back to
A
STBY
B
(white).
●
The status indicator of slot A goes out.
5 Stop backup recording.
●
Select [STBY] in [Main Menu]
B
[Record Set]
B
[Backup Rec]
and press the center of the set lever. (
A
Page 64)
(You can also press the user button that is assigned with
ABackup TrigB or ARec StopB. (A Page 66))
●
Recording to slot B stops, and the card slot mark of slot B
turns white (unselected state).
●
The characters
A
BACKUP
B
changes back to white.
●
The status indicator of slot B lights up in green.
Memo :
● During backup recording, if the space of one card runs
out, recording stops only for the card that is full.
●
When recording to both slots is stopped, recording in the
Regen mode will be enabled for the card slot in which
recording started.
●
When recording is started in the other slot while recording to
one slot, the clip being recorded is split and simultaneous
recording to the other card starts.
●
When recording is stopped for either slot A or B while
recording to both slots, the clip on the slot which is still
recording is split.
●
Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
●
Clip Cutter Trig cannot be performed during backup
recording. (
A
Page 41)
● When [Slot Mode] is set to ABackupB, [Rec Mode] can
only be set to ANormalB. (A Page 64)
Backup Rec (continued)
STATUS 1 Screen
ABACKUPB Display
Red
Red (selected state)
Red (unselected state)
White (unselected state)
White
GY-HM150U.book Page 44 Monday, September 5, 2011 1:48 AM