Color Television User's Guide

Connections

VCR or DVD player

To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your

VCR, DVD, or other Compu Link device. Plug the other end of the AV Compu Link cable into

the AV Compu Link input at the rear of the television.

Connecting to JVC AV Compu Link

JVC’s AV Compu Link feature makes playing video tapes or DVDs totally automatic. Simply

insert a pre-recorded tape* into your JVC-brand VCR or DVD into your JVC DVD player and

the device will automatically turn on and begin playback. At the same time, using the

AV- CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on

and switch to the proper video input

• The AV Compu Link cable may be included with the JVC AV Compu Link accessory you

wish to connect.If it is not, contact an authorized JVC Service Center for

part # EWP 805-012.

• AV Compu Link can only be used with JVC-brand products.

NOTES:

• In order for the VCR playback to begin automatically, the recording tabs must be removed

from the VHS tape. If the tab is in place, automatic switching will occur when you push the

VCR’s PLAY button.

• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.

• If your JVC-brand VCR has “A Code/B Code Remote Control Switching” (see your VCR’s

instruction book), using VCR A Code will switch the TV to input 1.

•To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see

the HiFi’s connection instructions for detailed connection information.

•AVCOMPU LINK III is compatible with select AV CompuLink receivers.

Illustration of AV-32D503