User's Manual
- 15 -
1. Press the / buttons and choose Lock on the
bar at the bottom of the screen.
2. Press the
/ buttons and choose the chan-
nel to be locked, and then press the OK button.
The Enter PIN code input window appears.
3. Press the number buttons to input the correct PIN
code.
If you have not changed the PIN code in the CON-
FIGURATION menus Enter PIN Code (see page 14),
input the PIN code you chose.
The lock icon appears next to the channel name in
the Edit PR List.
When a locked channel is chosen, the Enter PIN code
input window will appear. If the correct PIN code is
input, the picture appears.
When you forget the PIN code for the Lock, you
can unlock locked channels by performing Automatic
Search (see INSTALLATION ).
Setting the favourite channels
If only channels that you often watch are set as favourite
channels, you can choose from just those channels by
pressing
/ .
After setting the favourite channels, check the
Favourite Mode in Configuration (see page 13)
is set to ON.
1. Press the / buttons and choose Favourites
on the bar at the bottom of the screen.
2. Press the / buttons and choose the chan-
nel to be registered as a favourite channel, and then
press the OK button.
The favourite icon (
) appears on the right side of
the chosen channel.
When you leave the Channel List screen by pressing
MENU, the channel showing on the quarter screen is
selected for normal viewing on the whole screen.
Installation
Although your TV will not lose its settings or stored
channels when switched off, you may wish to re-install
the programs because you have moved to a different
area with different broadcast frequencies, you wish to
reinstate a channel previously deleted from the channel
list, or you want to watch new channels which have
started broadcasting.
Display the DTV Menu and using the or but-
tons, highlight the Installation line and press OK to dis-
play the Installation Menu.
The Installation menu appears.
You can either select Factory Settings, effectively re-
setting the receiver to its factory setting condition, or
just search for channels.
Automatic Search:
The receiver can search for channels automatically
(searching all the broadcast frequencies for free-to-air
channels).
To perform Automatic search, Select Automatic Search
with the or buttons and press OK. A warning
message is displayed.
This starts the automatic tuning process and searches
through all the available broadcast frequencies for free-
to-air channels.
Previous channels will be replaced on automatic search.
If no digital terrestrial television broadcasts are found,
the TV will display a message:
When OK button is pressed, following message will
appear on the right bottom side of the screen:
JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 24.05.2005, 15:2115