ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO AV-29FH1SUG AV-29FH1BUG COLOUR TELEVISION FARBFERNSEHGERÄT TELEVISEUR COULEUR KLEURENTELEVISIE TELEVISOR A COLOR TELEVISORE A COLORI TELEVISOR A CORES INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES ISTRUZIONI INSTRUÇÕES Cover01
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. 1. WATER AND MOISTURE The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be placed on the apparatus. 2. HEAT Never place the set near heat sources. Never put a naked flame, such as a candle, on the top of TV set. 3.
IDENTITY OF LOCAL & REMOTE CONTROL LOCAL CONTROL Front B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 MAIN POWER button FRONT S-VIDEO INPUT socket Ext-3 FRONT VIDEO INPUT socket Ext-3 FRONT AUDIO INPUT socket Ext-3 HEADPHONE socket B2 B3 B4 B5 B6 B7 B8 B9 ENGLISH B1 STAND-BY indicator REMOTE sensor TV / AV button VOLUME UP/DOWN buttons PROGRAM UP/DOWN buttons B10 Rear ANT AERIAL socket SCART 1 socket EXT-1 EXT-1 (S EXT-2 ) SCART 2 socket EXT-2 REMOTE CONTROL TV mode A1 A2 /I A3 0 9 zoom A4 A5 A6 A7 A8
SETTING UP Batteries Insert the main plug into a 220 - 240V 50Hz AC power socket. Warning: be careful to respect battery polarities. ENGLISH Open remote control battery compartment (at the rear) and insert two 1.5V type AA / R6 batteries. Connect aerial to aerial jack. It is usually connected by means of a 75 ohm cable. START UP SWITCHING ON Switch the TV set on with the MAIN POWER button (B1). LANGUAGE MENU The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen.
INSTALLATION AUTO TUNING SYSTEM MENU SELECTION Press remote control MENU button (A10) to display the MAIN MENU. Move the cursor to INSTALL by using the remote control CURSOR UP (A11),DOWN(A12) buttons. Then press the remote control OK button (A9). MENU ENGLISH Note: All menus are removed within 60 seconds if you don't press any button. COUNTRY SELECTION Position the cursor at ATSS Menu and select country code where TV is used by pressing the remote control CURSOR LEFT (A13), RIGHT(A14) buttons.
DELETE PROGRAMME POSITION DATA Position the cursor to the programme number you wish to delete using the remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE (A6) button. PICTURE/OK P The delete programme is instantly moved to programme N° 99. The programme which was located at N° 99 will automatically move to N° 98. SKIPPING THE CHANNELS ENGLISH Position the cursor to the programme number you wish to skip, then press the RED (SKIP) (A4) button.
BROADCASTING SYSTEM SELECTION Select INSTALL menu and using the remote control CURSOR UP (A11) / DOWN (A12) buttons, move the cursor to SYSTEM menu and select the appropriate system by the LEFT (A13) or RIGHT (A14) button.
T-V LINK FUNCTIONS When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: TO USE T-V LINK FUNCTIONS: A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable. Note: A "T-V LINK compatible VCR means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos.
DAILY USE SWITCHING ON AND OFF TV SET SWITCHING ON ENGLISH If stand-by indicator (B6) is not lit, then the TV set is powered off. Switch the set ON with POWER (ON/OFF) Button (B1), then, stand-by indicator turns to red. Press again PROGRAM UP or DOWN buttons (B10) on the front of the set, or POWER button (A2) or UP/DOWN button (A11) or, one of the NUMBER 0...9 button on the remote control, then stand-by indicator turn to green and picture appears on the screen.
SOUND CONTROL Mute Volume adjustment Use the remote control VOLUME UP (A14) / DOWN (A13) buttons or the TV set front panel VOLUME UP / DOWN buttons (B9). P - Mute the sound by pressing the remote control SOUND MUTE button (A1). - Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time. P - If a sound related function is used (e.g. VOLUME, the MUTE will also be cancelled.
PICTURE CONTROL P IC TUR E Select PICTURE menu from the MAIN menu. - Select and adjust the level of each function: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, TINT (if available) and NOISE REDUCTION. - The above modified values are automatically stored in FAVOURITE mode. - NOISE REDUCTION feature has 4 levels according to your preference. - The FAVOURITE preset contains the settings that you lastly entered.
FEATURES MENU Select the FEATURES MENU from the main MENU as follows : P MENU PICTUR E /OK P Press on the button MENU Position cursor on FEATURES menu Press on the OK button ENGLISH FEATURES menu content the following sub-menus. 1. Adjust this value ON or OFF. - In stand-by mode, the stand-by indicator flashes red and green to indicate the CHILD LOCK is set. - The front panel TV buttons (B7, B8, B9) become inactive and the TV will only respond to the remote control. 1.
TELETEXT ENTERING/LEAVING TELETEXT MODE - Set the VCR / / DVD switch (A25) to the (teletext) position. - Press the remote control TELETEXT ( ) button (A8) to select teletext mode. - To return to TV mode, press again the TELETEXT ( ) button (A8). - Note : Some of the buttons may not work if the VCR / / DVD) switch is not set to the (teletext) position. PICTURE/OK ENGLISH PAGE SELECTION - You can directly enter the 3 figure page number by using the remote control NUMBER 0..9 buttons (A3).
(A19) DOUBLE SIZE button Repeadly pressing the SIZE button doubles the character size in the following order : Upper half of the page > Lower half of the page > Return to normal size If the page is in UP or DOWN mode, then normal size is automatically set if - A new page request is made (e.g CYAN, INDIX or PAGE UP /DOWN). - A CANCEL mode (A22) function is used. - VOLUME menu is activated with the MENU button (A10) Note ; The menu at the base of the screen is always visible.
CONNECTING EXTERNAL EQUIPMENT The rear Scart EXT-1, Scart EXT-2 sockets, the front EXT -3 socket are three dedicated sockets to connect audio-video equipment. TV/AV SELECTION Allows to switch between TV and external modes. By repeatedly pressing the remote control AV (A15) or the TV front panel TV /AV button (B8), the on-screen display is changed as shown : AV EXT-1 > EXT-2 > EXT-2 S > EXT-3 > EXT-3 S > TV Remark: If the signal source from the rear SCART socket (EXT-1) is RGB (e.g.
TROUBLESHOOTING l If the plug is disconnected from the AC socket, or the TV aerial has problems, you may think there is a problem with the TV itself. Be sure to check the following before calling for service. IMP OR T A NT l Review all instruction in this manual P R OB L E M n GENERAL n SOUND The TV cannot be turned on. l Insert the plug in an AC socket. l Turn the main power on.
SPECIFICATIONS Item Broad casting systems Colour systems Model AV-29FH1SUG / AV-29FH1BUG CCIR B/G, I ,D/K, L/L' PAL, SECAM The EXT terminals also support the NTSC 3.58/4.43 MHz system.