User's Manual

14
Initial Settings
Initial Settings
3
To set the clock automatically: Display
the time zone selection screen (1),
select time zone (2), then confirm the
setting (3).
Then, go to step 5.
4 To set the date/time manually: Display
the manual clock setting screen (1),
set the date (2) and time (3), then
confirm the setting (4).
• To change the time display format, select
[12H] or [24H].
• When 12 hour time display format is
selected, you can change AM/PM by
selecting [AM]/[PM].
5 Select the time format and daylight
saving time setting .
<Switch 12H/24H
Display>
Selects the time format
([12H]: 12 hours/[24H]:
24 hours).
<Daylight Saving
Time>
Select your country to
activate the daylight
saving time. To deactivate
it, select [Off].
• In Mexico, select [US/CA] where US
daylight saving time is used.
6 Select the date display (1) and clock
type (2), then confirm the setting (3).
• To finish the procedure, touch the Home
button on the monitor panel.
LinkDisplayAudioNAS.indb14LinkDisplayAudioNAS.indb14 5/12/165:38PM5/12/165:38PM