User's Manual

KENWOOD CORPORATION TK-5800 FCC ID: K4437184110
3) DISPLAY LCD
No. Name Description
1 Dot Matrix(12digits) Alphanumeric display Channel/GID display Zone display
2 Dot Matrix(3digits) Channel/GID display Zone display OST list number display
3 Signal strength indicator
4 Monitor on display
5 Talk around display
6 Scan display
7 Message stack display
8 Priority channel 1/2 display
9 Telephone ID display
10 Horn alert display
11 Option board display
12 Public address display
13 Zone add display
14 Auto Recording Display on VGS-1 option
15 Auto Reply Message Display on VGS-1 option
16 CH/GID add display
17 AUX A display
18 AUX B display
19 OST display
TX/BUSY INDICATION
No. Name Description
1 Red TX display
2 Green Busy display
3 Orange Call display
OPERATING BASICSATING
• Switching Power ON/OFF
Press the switch to switch the transceiver ON.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
• Adjusting the Volume
The V
V
olume Up/Down SW control to adjust the volume. You can adjust the volume up sw to increases the volume
and the volume down sw to decreases it.
• Selecting a Channel
The C
C
hannel Up/Down SW to select a channel.
The channel up sw the channel number increases and The channel down sw decreases it.
• Transmitting
Note: Before transmitting, first monitor the channel to make sure it is not already in use.
1 Select your desired channel.
•If the channel is busy, wait until it becomes free.
2 Press the microphone P
P
TT switch and speak into the microphone. Release
the P
P
TT switch when you have finished speaking.
•For best sound quality at the receiving station, hold the microphone approximately 1.5 inches (3~4cm) from
your mouth.