Specification

Series Color Temperature Voltage Controls Finish
WPX0 LED ALO 850 - 1,650 Lumens SWW2 3000K / 4000K / 5000K MVOLT 120V - 277V PE Photocell (On/Off) DDBXD Dark bronze
Note: The lumen output and input power shown in the ordering tree are average
representations of all configuration.
NOTES:
Default out of the box settings: 1,650 Lumens, 4000K, Photocell enabled
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com
© 2020-2022 Acuity Brands Lighting, Inc. All rights reserved.
WPX0 LED
Rev. 09/12/22
COMMERCIAL OUTDOOR
WPX0 LED
Wall Pack
Ordering Information
EXAMPLE: WPX0 LED ALO SWW2 MVOLT PE DDBXD
Catalog
Number
Notes
Type
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The WPX LED wall packs are energy-efficient,
cost-effective, and aesthetically appealing
solutions for both HID wall pack replacement and
new construction opportunities. Available in four
sizes, the WPX family delivers 850 to 9,200 lumens
with a wide, uniform distribution.
The WPX0 full cut-off wall pack is an excellent
above the door lighting solution. Reliable
IP66 construction and excellent LED lumen
maintenance ensure a long service life. Standard
features such as Adjustable Lumen Output (ALO),
color switching and switchable photocell make
WPX0 ideal for any application.
Specifications
FEATURES & SPECIFICATIONS
INTENDED USE
The WPX LED wall packs are designed to provide a cost-effective, energy-efficient solution for
the one-for-one replacement of existing HID wall packs. The WPX0, WPX1, WPX2 and WPX3 are
ideal for replacing up to 70W, 150W, 250W, and 400W HID luminaires respectively. WPX luminaires
deliver a uniform, wide distribution. WPX is rated for -40ºC to 40ºC.
CONSTRUCTION
WPX feature a die-cast aluminum main body with optimal thermal management that both
enhances LED efficacy and extends component life. The luminaires are IP66 rated, and sealed
against moisture or environmental contaminants.
ELECTRICAL
Light engine consist of high-efficacy LEDs and LED lumen maintenance of L86/100,000 hours.
Color temperature (CCT) can be switched between 3000K, 4000K and 5000K with minimum CRI
of 80. Electronic driver ensures system power factor >90% and THD <20%. The luminaire operates
on MVOLT (120V - 277V) input.
A module inside the luminaire allows the installer to not only switch between CCTs, but also the
adjust the lumen output and switch on and off the photocell (PE).
INSTALLATION
WPX can be mounted directly over a standard electrical junction box. A port on the back surface
allows poke-through conduit wiring on surfaces that don't have an electrical junction box. Wiring
can be made in the integral wiring compartment in all cases. WPX is only recommended for
installations with LEDs facing downwards.
LISTINGS
CSA Certified to meet U.S. and Canadian standards. Suitable for wet locations. IP66 Rated.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC
qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm
which versions are qualified.
WARRANTY
5-year limited warranty. This is the only warranty provided and no other statements in this
specification sheet create any warranty of any kind. All other express and implied warranties are
disclaimed. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.
H
W
D
Depth (D): 2”
Height (H): 5.75”
Width (W): 5.5”
Weight: 2.5lbs