Specification
One Lithonia Way, Conyers, GA 30012 | (800) 705-SERV (7378) | TechSupport-DecorativeResidential@Acuitybrands.com www.acuitybrands.com
© 2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/19/22
Page 3 of 6
CONTRACTOR SELECT RETROBASICS-RB4_RB4S
DOWNLIGHT LED TRIM KIT:
Molded thermal plastic housing with non-conductive trim frame offered in bafe or smooth
design in matte white nish • Pressed-in diffusing lens optimized for concealing the LEDS
from direct view in the on and off state • All-in-one design where LED light engine mounts
directly to the trim for ease of installation into existing 4" recessed housings with medium
base sockets or quick connect LED housings • Provided with push in springs
LED LIGHT ENGINE:
LEDs are mounted directly to housing providing superior thermal management to ensure
long life • Switchable white LED color temperature technology offers 2700K, 3000K,
3500K, 4000K, 5000K all in one trim • Switch factory set at 3000K • 90 CRI minimum
• Accommodates 120 volts AC at 60Hz • Dimmable with most standard incandescent,
magnetic low voltage and electronic low voltage dimmers • For a list of compatible dimmers,
see JUNORBSERIES-DIM
OPTICAL SYSTEM:
Regressed, diffused lens at end of mixing chamber to provide even light distribution for
general illumination • Optimized for wide xture spacings • Up to 625 nominal lumens is
equivalent to 65W BR30 lamp
ELECTRICAL CONNECTIONS:
Trim features quick connect plug installed as standard for installation into Juno quick connect
housings with mating connector • Trim ships with a medium base socket adapter whip for
installation into 4" incandescent housings with medium base sockets.
LIFE:
Rated for 50,000 hours at 70% lumen maintenance.
LABELS:
CSA certied to US and Canadian safety standards • ENERGY STAR® certied product
• Suitable for wet location • Air-Loc certied in accordance with ASTM E283-2004 • NOM
Certied • Can be used to comply with California Title 24 Part 6 High Efcacy LED light Source
Requirements • T20 Certied.
TESTING:
All reports are based on published industry procedures; eld performance may differ from
laboratory performance.
WARRANTY:
5-year limited warranty. This is the only warranty provided and no other statements in this
specication sheet create any warranty of any kind. All other express and implied warranties
are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/
warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
2.16"
3.85"
5.25"
5.25"
2.16"
3.85"
5.25"
5.25"