User's Manual

3. Quickly (within 30 seconds) press the

PAIRING

key on the camera cable. The green Pair LED on

the selected camera blinks once, pauses, and then stays on to indicate that data transmission is

in progress.

PAIRED

displays on the screen if pairing is successful or

PAIRING FAIL

if it isn’t. If Pairing fails,

repeat these steps. If Pairing fails again, move the camera and monitor closer together and

repeat.

Press

ESC

to back out and return to the main menu or press

VOL+

VOL

to select another

camera to pair.

Image Brightness

1. With the

SETUP DETAIL OPTIONS

screen displayed for a camera, press

CH+

to highlight the

Brightness selection.

2. Press

VOL+

VOL

to adjust the camera’s brightness; the five levels are OFF, 1 - 4. The default

level is 2.

3. Press

accept the new setting and return to the

SETUP DETAIL OPTIONS

screen. Select

another camera if needed.