Installation Guide

E-Z STROKE SAW
English
INSTALLATION
CAUTION
Please be sure to read the instructions carefully and install properly.
1. Always wear safety goggles when working with tools.
2. Never tap the blade on any surface while holding the handle, damage can result.
3. Gloves are recommended to protect hands from sharp teeth.
1. Wrap the blade in a rag or towel for safety.
2. Tap the handle end with saw teeth facing upward to loosen the blade.
3. Pull the blade out of the spine.
4. Wrap the blade in a rag or towel for safety.
5. Insert the blade into the spine and hook into the pivot.
6. Squeeze the blade into the gap of the spine as a temporary lock.
7. Tap the handle and gently, with the saw teeth facing
downward, x the blade rmly.

Summary of content (2 pages)