Use and Care Manual
Table Of Contents
- 22” and 25” Open-End Drum Sanders
- 1.0 IMPORTANT SAFETY INSTRUCTIONS
- 2.0 About this manual
- 3.0 Table of contents
- 4.0 Specifications
- 5.0 Features and Terminology
- 6.0 Setup and assembly
- 7.0 Electrical connections
- 8.0 Adjustments
- 9.0 Operations
- 10.0 User-maintenance
- 11.0 Tracker kit
- 12.0 Abrasives
- 13.0 Troubleshooting JWDS-2244,-2550 Drum Sanders
- 14.0 Optional accessories
- 15.0 Replacement Parts
- 15.1.1 JWDS-2244/-2550 Head Assembly – Exploded View
- 15.1.2 JWDS-2244 Head Assembly – Parts List
- 15.2.1 JWDS-2244/-2550 Conveyor Table Assembly – Exploded View
- 15.2.2 JWDS-2244 Conveyor Table Assembly – Parts List
- 15.2.3 JWDS-2550 Conveyor Table Assembly – Parts List
- 15.3.1 Open Stand Assembly for JWDS-2244/-2550 – Exploded View
- 15.3.2 723540OS Open Stand Assembly for JWDS-2244 – Parts List
- 15.3.3 (OPTIONAL) 723550OS Open Stand Assembly for JWDS-2550 – Parts List
- 15.4.1 (OPTIONAL) Infeed/Outfeed Tables for JWDS-2244/-2550 – Exploded View
- 15.4.2 (OPTIONAL) 723541 Infeed/Outfeed Tables for JWDS-2244 – Parts List
- 15.4.3 (OPTIONAL) 723551 Infeed/Outfeed Tables for JWDS-2550 – Parts List
- 15.5.1 (OPTIONAL) Digital Readout for JWDS-2244/-2550 – Exploded View
- 15.5.2 (OPTIONAL) Digital Readout for JWDS-2244/-2550 – Parts List
- 15.6.1 Depth Stop Assembly for JWDS-2244/-2550 * – Exploded View
- 15.6.2 Depth Stop Assembly for JWDS-2244/-2550 * – Parts List
- 15.7.1 (OPTIONAL) Closed Stand Assembly for JWDS-2550 – Exploded View
- 15.7.2 (OPTIONAL) Closed Stand Assembly for JWDS-2550 – Parts List
- 16.0 Electrical Connections for JWDS-2244/-2550
- 17.0 Warranty and service
6
4.0 Specifications
Table 1
Model number
JWDS-2244 JWDS-2550
Stock numbers
Sander/conveyor 723540B 723550B
Sander/conveyor/open stand 723540OSK 723550OSK
Sander/conveyor/closed stand 723544CSK
Accessories
(separate
purchase unless
indicated
otherwise)
Open stand 723540OS 723550OS
Closed stand 723544CS
Folding Infeed/outfeed tables 723541 723551
Digital readout 723552
Depth stop assembly 723553
723553
(included w/JWDS-2550)
Motor and Electricals
Drum motor type TEFC induction
Horsepower 1-3/4 HP (1.3 kW)
Phase 1
Voltage 115 V
Cycle 60 Hz
Listed FLA (full load amps) 15 A
Motor speed 1725 RPM
Starting amps 43 A
Running amps (no load) 6.8 A
Start capacitor 300MFD 125VAC
Run capacitor
50μF 250VAC
Conveyor motor type totally enclosed DC
Horsepower 1/30 HP (25 W)
Phase 1
Voltage 115 V
Listed FLA (full load amps) 0.6 A
Motor speed 54 RPM
On/off switch Toggle with safety key
Power transfer Direct drive
Power cable and plug SJT 12AWG x 3C 300V, 6 ft., 15A plug
Recommended circuit size
1
20 A
Sound emission
2
68.5 dB at 100cm
70 dB at 50cm
69 dB at 100cm
70.5 dB at 50cm
Capacities
Maximum board width (single pass) 22 in. (55.9 cm) 25 in. (63.5 cm)
Maximum board width (two passes) 44 in. (111.76 cm) 50 in. (127 cm)
Maximum board thickness 4 in. (102 mm)
Minimum board length 3-2/8 in. (60 mm)
Minimum board thickness
3
1/32 in. (0.8 mm)
OPTIONAL infeed/outfeed table capacity 35 lbs. (16 kg)
Main materials
Main body aluminum die casting and steel
Drum extruded aluminum
Conveyor table steel
Drum height adjustment handle Aluminum die casting and plastic
OPTIONAL Infeed/Outfeed tables steel