Use and Care Manual

6
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly even
death.
4.0 Specifications
Model number ....................................................................... JPJ-12B ................................................ JPJ-12BHH
Stock number .......................................................................... 715100 ....................................................... 715155
Cutterhead speed (rpm) .............................................................. 5300 ........................................................... 5300
Cutterhead diameter (in.) ............................................................ 2-3/4 ........................................................... 2-3/4
Number of knives .............................................................................. 3 .................................. 42 four-sided inserts
Knife size (LxWxT) (in.) ..................................... 12-3/16 x 11/16 x 1/8 ...................................... 0.59 x 0.59 x 0.10
Dust port outside diameter (in.) ......................................................... 4 ................................................................. 4
Dust collection minimum (CFM) .................................................... 550 ............................................................. 550
Jointer table size (LxW) (in.) ........................................... 55 x 12-1/32 ............................................... 55 x 12-1/32
Table height from floor (in.) ....................................................... 33-1/2 ......................................................... 33-1/2
Maximum stock removal (in.) ......................................................... 1/8 .............................................................. 1/8
Fence size (LxH) (in.) .................................................... 43-1/4 x 5-7/8 ............................................. 43-1/4 x 5-7/8
Fence tilt .......................................................................... 90° to 45° R ................................................ 90° to 45° R
Fence positive stop ...................................................... 90° and 45° R ............................................. 90° and 45° R
Fence travel (in.) ............................................................................... 6 ................................................................. 6
Planer table size (LxW) (in.) ............................................ 25 x 12-1/32 ............................................... 25 x 12-1/32
Maximum workpiece thickness (in.) ............................................ 8-3/4 ........................................................... 8-3/4
Maximum depth of cut (in.) ........................................................... 5/32 ............................................................ 5/32
Minimum length of workpiece (in.) .................................................. 10 ............................................................... 10
Feed rate (low speed / high speed) (fpm) ................................ 16 / 26 ........................................................ 16 / 26
Table movement per one handwheel revolution (in.) ................... 5/32 ............................................................ 5/32
Motor, TEFC ................................... 3HP, 1PH, 230V only, 60Hz, 15A .............. 3HP, 1PH, 230V only, 60Hz, 15A
Switch ............................................... magnetic switch and limit switch ................ magnetic switch and limit switch
Power cord ............................................................. 14AWG 300V, 6 ft ...................................... 14AWG 300V, 6 ft
Power cord plug .............................................. CSA 6-15P, 15A/250V ............................... CSA 6-15P, 15A/250V
Overall dimensions (LxWxH) (in.) ................. 55-7/16 x 28-15/16 x 40 ............................. 55-7/16 x 28-15/16 x 40
Stand footprint (LxW) (in.) ................................................. 24 x 21-1/4 ................................................. 24 x 21-1/4
Net weight (lb) ............................................................................... 453 ............................................................. 453
The specifications in this manual are given as general information and are not binding. JET reserves the right to effect,
at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed
necessary for any reason whatsoever.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury!