Use and Care Manual

JET
5
Tool specifications
Model number JAT-483
Stock number 505483
Cutting disc size (Dia. x thickness) 100 x 0.8 mm (4 x 1/32 in.)
Cutting disc hole diameter 9.6 mm (3/8 in.)
Cutting capacity metal 19~25.4 mm (3/4 – 1 in.)
Horsepower 1.0
Free speed (@90psi) 14,000 RPM
Average air consumption (@90psi) 4 CFM
Air inlet 1/4 in. NPT, swiveling
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Vibration value 3/8 m/s
2
Noise level
1
85.5 dB(A)
Grip Inline
Disc guard steel, 126-degree, 11-position, rotating
Overall Length 14.6 in. (371 mm)
Housing material Composite
Net weight 4.1 lb. (1.87 kg)
Shipping weight 4.8 lb. (2.19 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.