VM9725BT Operating Instructions 160 watts peak 40W x 4
VM9725BT Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9725BT Mobile Multimedia Receiver for maximum enjoyment. CONTENTS Features .................................................................................................................. 3 Controls and Indicators .................................................
VM9725BT FEATURES Congratulations on your purchase of the Jensen VM9725BT Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9725BT installed by a reputable installation shop.
VM9725BT Chassis • • • • • • 2.0 DIN (Import / ISO-DIN Mountable) Fixed Front Panel 6.2” High Definition TFT LCD 1,152,000 Sub Pixels (800 x 3 X 480) Beep Tone Confirmation (ON-OFF Option) Heat Management System - Forced-Air Cooling To Keep The Chip-Sets Operating at Nominal Temperatures General • Built-In Bluetooth® with external microphone, providing Hands-Free operation for safety and convenience and A2DP for streaming music from your smartphone or other Bluetooth® device.
VM9725BT WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
VM9725BT CONTROLS AND INDICATORS 13 1 2 EJECT 3 SRC 4 NAV 5 6 7 8 9 10 OPEN 11 12 6 VM9725BT 14
VM9725BT 1. Disc Slot 2. EJECT Button Press to eject a disc. 3. SRC Button Press to switch between the available audio/video sources applied to the unit. 4. NAV Button Press to toggle back and forth between the navigation and currently selected source. 5. Internal Microphone Internal microphone for Bluetooth calls. 6. Reset Button Press to reset system settings to factory default (except password and parental lock settings). 7. Rotary Encoder / Power On/Off ( ) Button Rotate to adjust the volume.
VM9725BT REMOTE CONTROL See Table 1 for remote control functions.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ USB iPod EQ 1 Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. Accesses equalizer menu. POWER (( )) 2 Turns the power on/ off. Turns the power on/ off. Turns the power on/ off. Turns the power on/ off. Turns the power on/off. PHOTO/ 3 SUBTITLE Language selection for subtitle. VIDEO/ ANGLE 4 Plays back disc in different angle for a scene.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ USB iPod Selects the previous chapter for playback. Selects the previous chapter for playback. Searches for an available radio station by decreasing tuning frequency. Selects the previous track for playback. Pauses playback/ starts playback. 10 Selects the next chapter for playback. Selects the next chapter for playback. Searches an available radio station by increasing the tuning frequency.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD TUNER CD/MP3/ iPod USB MUTE 16 Toggles on/off audio output. Toggles on/off audio output. Toggles on/ off audio output. Toggles on/off audio output. Toggles on/ off audio output. SCN /* 17 MIX /# 18 Plays all chapters in random order. Plays all tracks in random order. Plays all tracks in random order 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (Numeric Keypad) 19 Directly accesses chapter.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD VCD 23 Pauses playback/ starts playback. Pauses playback/ starts playback. SETUP 24 Displays Setup menu. Displays Setup menu. PRESET 25 RPT 26 Repeats playback of current chapter. Repeats playback of current chapter. REPT A-B 27 Setup to repeat playback from time frame A to time frame B. Setup to repeat playback from time frame A to time frame B. GOTO 28 Open direct entry search screen.
VM9725BT Table 1: Remote Control Functions Button Function Name # DVD ZOOM 31 Zooms in/ out on an image. Zooms in/ out on an image. DISP 32 Displays Displays playing information. playing information. VCD TUNER CD/MP3/ USB iPod Displays playing information. Display playing information. Displays playing information. MUSIC/ 33 Changes AUDIO the audio language for disc playback. Selects Music mode. EJECT ( ) 34 Ejects the disc. Ejects the disc. Ejects the disc. Ejects the disc.
VM9725BT OPERATING INSTRUCTIONS Power On / Off Press the Power On/Off ( ) button to turn the unit on. The buttons on the front of the unit light up and the current mode status appears on the LCD. Press and hold the button to Power On/Off ( ) power off the unit. Audible Beep Confirmation An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu. Mute Momentarily press the rotary encoder to activate the MUTE function. Press again to resume normal listening.
VM9725BT Playing Source Selections Front Source Menu Source Menu Page 1 Source Menu Page 2 You can use the touch screen to change the source through the SOURCE MENU. To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button. The SOURCE MENU consists of two pages. Swipe across the screen to go from one page to another.
VM9725BT Rear Source Menu The Rear Source Menu Screen allows you to select an audio/video source for your vehicle’s rear zone. Touch the Disc, SOHC, F-USB (Front USB), R-USB (Rear USB), AUX1or AUX2 icons to select the corresponding source NOTE: If an iPod® is attached to a USB port, “iPOD” appears instead of the text “F-USB” or “R-USB.
VM9725BT External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod®, Zune, etc. can be connected to this unit via RCA output using an A/V Media Adapter Cable (not included). Cover Not Shown Right Audio Left Audio Ground V ideo 1 2 3 4 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector on the front of the radio. Select “AUX IN” mode to access auxiliary devices.
VM9725BT Equalizer and Balance/Fader Controls The equalizer and balance/fader controls allow you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Equalizer Screen Touch the EQ button display the equalizer screen.
VM9725BT Preset EQ Selection Equalizer presets apply a preset sound level to the unit’s audio output signal. Touch the User, Acoustic, Urban, Rave, Latin, Dance, Hip Hop or Rock button to change the setting. NOTE: The equalizer will automatically change to “USER” when individual audio functions are adjusted. To Exit the Equalizer: • Touch the X button on the top right corner of the screen to return to the source screen. • Touch the BAL-FAD button to display the balance/fader screen.
VM9725BT Balance/Fader Screen Touch the BAL-FAD button on the left side of the equalizer screen to display the balance/fader screen. or (Balance) icon: Balances the audio output levels between the left and right side of the vehicle. Touch the or icon to change the setting. or (Fade) icon: Balances the audio output levels between the front and back side of the vehicle. Touch the or icon to change the setting. Sub icon: Reduces or increases the subwoofer sound level.
VM9725BT System Reset To correct a system halt or other illegal operation, use [RESET] Button the tip of a pen to press the reset button located over the rotary encoder. After a system reset, the unit restores all factory default settings. NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete. Image/Display Settings Video Output Modes Table 3 shows the video output mode for each playing source.
VM9725BT STEERING WHEEL CONTROLS (SWC) (if equipped) The VM9725BT is compatible with the PAC (Pacific Accessory Corporation) SWI-PS and Metra ASWC steering wheel control adapters. A 3.5 mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the adapters. Please refer to the instructions included with the adapters for detailed installation information. SWC Functions The following controls are available for most vehicles: 1. Volume Up 2. Volume Down 3. Mute 4.
VM9725BT SETTINGS MENU When using the VM9725BT for the first time, it is recommended that you customize the system settings to suit your preferences. You may also change the settings at any time. To access system settings: 1. Touch the Settings button on the Source Menu screen to enter the SETTINGS MENU. The General Sub-menu appears highlighted in blue. 2. Touch a sub-menu name icon (Video, General, Time, etc.) to select a submenu.
VM9725BT NOTE: If the rear-view video camera is connected and the unit is on, Camera mode is selected upon shifting into REVERSE gear. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to its original input mode. General Sub-menu Settings Setting Options Function User Interface Color Aqua This setting allows the user to select five pre-defined LED colors for the front panel illumination.
VM9725BT Beep Background Off No beep sounds. On When turned on, an audible beep tone confirms each function selection. Animation Star Allows the user to select a screen background. The Wallpaper will not appear on the Main Source Menu, Camera source or EQ settings page. Starry Sky Black Animation Fireworks Animation Wave User Defined Calibration Start Press to access the touch screen calibration function. Demo On Display various user interface TFT display pages.
VM9725BT Time Sub-Menu Settings Setting Options Date mm/dd/ yyyy Clock Mode 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock displays 24 hour time up to 23:59. (HH:MM) Clock appears in the top right corner of the screen during certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12.
VM9725BT Language Sub-menu Settings If a DVD supports more than one subtitle or audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used. Setting Options Function OSD English On Screen Display appears in English. French On Screen Display appears in French. Portuguese On Screen Display appears in Portuguese. Spanish On Screen Display appears in Spanish.
VM9725BT Bluetooth Sub-Menu Settings Setting Options Function Bluetooth On Enable Bluetooth function. Off Disable Bluetooth function. On Connect the last active mobile phone by touching the Pair icon when disconnected. Off Automatically connect when your paired phone is in range On The unit automatically answers all incoming calls. Off Manually answer calls by touching the call icon. Internal Selects internal microphone for Bluetooth calls.
VM9725BT DVD Rating Sub-menu Settings The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once set up, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.
VM9725BT Volume Sub-menu Settings Setting Options Function DVD 0 - 12 Increase or reduce the relative DVD volume. USB 0 - 12 Increase or reduce the relative USB volume. SD 0 - 12 Increase or reduce the relative SD volume Radio 0 - 12 Increase or reduce the relative radio volume. Bluetooth 0 - 12 Increase or reduce the relative Bluetooth volume. AV-IN1 0 - 12 Increase or reduce the relative AV-IN1 volume. AV-IN2 0 - 12 Increase or reduce the relative AV-IN2 volume.
VM9725BT TUNER OPERATION Tuner TFT Display Screen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. RADIO icon: Touch to view the SOURCE MENU and select a new playback source. Current radio band indicator. Stereo broadcasting indicator. Local/Distance Indicator: Strong local signal broadcasting indicator. Equalizer setting indicator: Displays the current equalizer preset setting. EQ icon: Touch for quick access to Equalizer level settings screen.
VM9725BT Options Screen Touch the Options icon to display the Options Screen. RDS ON/OFF: Radio Data System (RDS) enables traffic reports to be received and provides many facilities, including enabling the radio station name to be displayed on the radio display. CT ON/OFF: (Clock Time, RDS feature) When enabled the radio system clock is synchronized with broadcasters time signal setting the clock automatically.
VM9725BT Switching to Radio Tuner Source • Touch the top left corner of the screen (the RADIO box) to view the SOURCE MENU. Touch “Radio”. • Press the SRC button on the front panel to switch to the AM/FM or RADIO source. Selecting FM/AM Band Touch the BAND icon on the screen to change between the following bands: FM1, FM2, FM3, AM1, and AM2. Tuning to a Station Seek Tuning To seek the next higher station, touch the To seek the next lower station, touch the icon. icon.
VM9725BT Using Preset Stations Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen. Storing a Station 1. Select a band (if needed), then select a station. 2. Touch the on-screen Mem icon to access the Preset Screen. 3. Touch the preset number in which you would like to store the current station (or touch X to cancel and close the menu). The station frequency is displayed at the top of the menu.
VM9725BT Auto Store (AS) Auto Store is most useful when travelling in an area where you are not familiar with the local stations. The Auto-Store Tuning feature will automatically scan and enter up to eighteen FM strong stations into the preset memory locations for the FM1, FM2 and FM3 bands or twelve strong AM stations into the preset memory locations for the AM1 and AM2 bands. Each band stores up to six preset stations. To select six strong stations and store them in the current band: 1.
VM9725BT Search for Station by Program Type Program type (PTY) allows users to find similar programming by genre. 1. From the Tuner TFT Display, touch the Options icon to display the Options Screen. 2. Touch the PTY List icon to display the Program Type Screen. 3. Touch a program type, then touch the Search icon. The unit searches for the respective stations and stops when a station is found. Note: Touch the or icon to scroll up or down the page.
VM9725BT DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays: DVD/VCD TFT Display WARNING !!! It is illegal to view video while driving or operating a motor vehicle. Set the parking brake to view video. To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD is playing. Touch to view a second page of controls.
VM9725BT Menu Page 1 1. Elapsed Time Indicator: Displays the total playing time and elapsed of the current movie playing. 2. icon: Touch to select a chapter/track directly using the on-screen display direct entry menu display. 3. icon: Touch to stop DVD playback. 4. icon: Touch to move to previous chapter. 5. (Pause / Play ) icon: Touch the icon to pause playback. Touch the icon to begin playback. 6. icon: Touch to advance to the next chapter on the DVD. 7.
VM9725BT Controlling Playback Inserting a Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “Rating Sub-menu Features”). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.
VM9725BT Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. • Touch A-B on the second page of DVD on-screen controls to set the start point (A) of the repeated section. • Touch A-B again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously. • Touch A-B a third time to cancel the A-B section setting and stop repeat play.
VM9725BT Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, touch Audio on the second page of DVD on-screen controls to choose a language. Each time the icon is touched the language will change. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, touch Subtitle on the second page of DVD on-screen controls to choose the language in which you would like the subtitles to appear.
VM9725BT General Disc Information Table 4: Disc Properties Symbol 12 cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Table 5: Disc Symbols Symbol Meaning Number of voice languages recorded.
VM9725BT DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. Media Requirements The VM9725BT will play music or other audio files from the following disc media: • CD-DA • CD-R/RW • DVD • DVD+R/RW • DVD-R/RW Upon inserting a disc, the disc and track title (if available), along with the track number and playing time appear on the screen.
VM9725BT 1. Disc icon: Touch to view the SOURCE MENU and select a new playback source. 2. Track Indicator: Displays the current track number playing and total number of tracks on disc. 3. EQ : Touch for quick access to the Equalizer level settings menu. 4. Clock: Displays the time as entered by the user in the settings menu. 5. (Repeat) icon: Touch to alter repeat mode as follows: Repeat Single > Repeat Folder > Repeat All > Repeat Off 6.
VM9725BT Playlist Screen The Playlist screen allows you to directly search for music on your disc. • Touch a track title (if available) or track number to begin playback of that track. • Touch the or icon to scroll up or down the page. • Touch the Search icon to access the Disc Search Screen. Disc Search Screen Enter the desired track the on-screen number pad. If you wish to delete an entry number touch the red X on the keypad. Press ok to play to the selected track.
VM9725BT Controlling Playback Inserting a Disc Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the EJECT ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
VM9725BT MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
VM9725BT For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9725BT player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level.
VM9725BT MP3/WMA TFT Display The on-screen indicators and touch key areas for MP3/WMA playback are outlined below. 1. Disc icon: Touch to view the SOURCE MENU and select a new playback source. 2. Track Indicator: Displays the current track number playing and total number of tracks on disc. : Touch for quick access to the Equalizer level settings menu. 3. EQ 4. Clock: Displays the time as entered by the user in the settings menu. 5.
VM9725BT Playlist Screen The Playlist screen allows you to directly search for music, video or photo files stored on your MP3 disc/USB device. • Touch a folder to view the contents of the directory or touch a track title/file name to begin playback of that file. • Touch the or icon to scroll up or down the page. • Touch the Search icon to access the Disc Search Screen. Disc Search Screen Enter the desired track the on-screen number pad. If you wish to delete an entry number touch the red X on the keypad.
VM9725BT Search Playlist by File Type 1. Touch the MUSIC icon. 2. Touch “MUSIC,” “PHOTO” or “VIDEO”. The list of files that appear will be filtered by the type of file selected. Controlling Playback Inserting a Disc Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there is already a disc in the unit or if the power is off. Ejecting a Disc Press the EJECT ( ) button on the front of the unit to eject the disc. The unit automatically reverts to Tuner mode.
VM9725BT Pausing/Resuming Playback Touch the icon to pause playback. Touch the icon to resume playback. Moving Through Tracks Touch the Next ( ) icon to advance to the next track on the MP3 disc/USB device. Touch the Previous ( ) button to move to the previous track on the MP3 disc/USB device. Repeat Playback Touch the (Repeat) icon to alter repeat mode as follows: Repeat Single > Repeat Folder > Repeat All > Repeat Off NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
VM9725BT iPod®/iPhone® OPERATION ® NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. Accessing iPod® Mode This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen to access Playlist, Artist, Albums, Songs, etc.
VM9725BT Indicators/Controls The on-screen indicators and touch key areas for iPod® playback are outlined below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 54 iPod icon: Touch to view the SOURCE MENU and select a new playback source. 1/25 indicator: File number and total number of files on the disc. EQ icon: Touch for quick access to Equalizer level settings. Clock: Displays the time as entered by the user in the settings menu. Pandora icon: Touch to play Pandora Radio.
VM9725BT Search Menu The Search Menu allows you to search for playlists, artists, albums, songs, genres, composer, podcast or audio book. 1. 2. 3. 4. 5. 6. 7. 8. iPod icon: Touch to view the SOURCE MENU and select a new playback source. 1/25 indicator: Indicates the file number playing and total number of files in the category. EQ icon: Touch for quick access to Equalizer level settings. Clock. Displays the time as entered by the user in the settings menu.
VM9725BT Direct Track Entry To select a track directly: 1. Touch the Search icon on the Search Menu to display the direct entry menu. 2. Enter the desired track the on-screen key pad. If you wish to delete an entry number touch the red X on the keypad. Press ok to play to the selected track. To exit the screen without changing the station, touch the iPod icon in the upper right corner.
VM9725BT PANDORA RADIO OPERATION Pandora Radio is available via your iPhone® (data usage will occur) or iPod® touch (Wi-Fi). NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device . For iPod® video or photo playback, you must purchase the jLink-USB cable. NOTE: The Pandora app must be installed on your iPhone®/iPod® touch.
VM9725BT 12. Station List icon: Press this icon to access the Station List Screen. 13. Elapsed Time indicator: Displays the elapsed and total playing time of the current track playing. 14. Playback Information Display: Displays station, track, artist, album, and elapsed time information. Bookmark Submenu • Touch the Bookmark this Track icon to bookmark a track. • Touch the Bookmark this Artist icon to bookmark an artist. • Touch the Cancel icon to return to the Pandora Radio screen.
VM9725BT To Launch/Stop Pandora Radio 1. Launch the Pandora app on your iPhone®. The Pandora icon appears on the Main Menu Screen. 2. Touch the Pandora icon. The Pandora Screen appears. 3. Touch the icon to begin playback or the icon to pause playback. 4. Touch the iPod icon to exit Pandora and go to the iPod Search Menu.
VM9725BT Pandora Error Messages Message Displayed Cause Corrective Action BookMark Track Error Software Error The track could not be bookmarked, please try again in a moment. BookMark Artist Error Software Error The song could not be bookmarked, please try again in a moment. Thumbs Up / Down Error “Error Track Rating” Software Error Song feedback could not be sent, please try again in a moment. No Active Station Error Software Error This account has no stations in it. Please visit Pandora.
VM9725BT BLUETOOTH OPERATION Bluetooth® was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.
VM9725BT Bluetooth User Interface The on-screen indicators and touch key areas for Bluetooth® functions are outlined below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 62 BT icon: Touch to view the SOURCE MENU and select a new playback source. HTC Desire Z indicator: Name of the connected device. Clock: Displays the time as entered by the user in the settings menu. Missed Call icon: Touch to access the missed calls list. Received Call icon: Touch to access the received calls list.
VM9725BT Hands Free Profile (HFP) To use a mobile phone with this unit, it is necessary to first establish a connection using Bluetooth® wireless technology. The connection is normally established using Hands Free Profile (HFP), which gives you full control of functions available on the mobile phone source. However, depending on your mobile phone, the connection may be made using Head Set Profile (HSP), making some functions unavailable. This is a limitation of your mobile phone, not the VM9725BT.
VM9725BT 8. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process. NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for many mobile phones is “0000”. The default code for the unit is “1234”. 9. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for the unit is “1234”. 10.
VM9725BT Answering an Incoming Call To answer an incoming call touch the icon. For best reception, speak loudly and clearly into the microphone. To end the conversation, touch the icon. Rejecting an Incoming Call Press the Transfer to Phone icon to reject an incoming call. The call will revert to your mobile phone and be left for voice mail.
VM9725BT Call Transfer While talking, to transfer audio from the unit back to the mobile phone, touch the Transfer to Phone icon and the following screen will appear: Pressing the Transfer to Phone icon again will return the audio from the mobile phone to the unit. Missed Calls The missed calls list retrieves the list of missed numbers from your mobile phone if your mobile phone allows the function. The last missed number is the first number on the list.
VM9725BT Received Calls The received calls list retrieves the list of numbers from your mobile phone if your mobile phone allows the function. The last received number is the first number on the list. To make a call from the received calls list, touch the call’s name and it will be dialed. Dialed Calls The dialed calls list retrieves the list of dialed numbers from your mobile phone if your mobile phone allows the function. The last dialed number is the first number on the list.
VM9725BT Phone Book The phone book is a copy of the contact list on your mobile phone which contains a listing of your important names and phone numbers. Touch the or icon to scroll up or down the contact list page. To make a call from the phone book, touch the contact’s name. Touch the on the next screen and it will be dialed.
VM9725BT Bluetooth Music Function Bluetooth® provides an Advanced Audio Distribution Profile (A2DP) profile for streaming music from a mobile phone or a portable multimedia player (PMP), sometimes referred to as a MP3 player. The unit allows you to play back audio files from your mobile phone or a PMP using a Bluetooth® connection. NOTE: Please quit A2DP mode before attempting to make a phone call, as unexpected results may occur depending on your mobile phone model.
VM9725BT SiriusXM® RADIO OPERATION Everything worth listening to is on SiriusXM®, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A Vehicle Tuner (sold separately) and subscription are required. For more information, visit www.siriusxm.com. Sirius, XM and all related marks and logos are trademarks of SiriusXM® Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved.
VM9725BT SiriusXM® User Interface The on-screen indicators and touch key areas for SiriusXM® functions are outlined below. Menu Page 1 Menu Page 2 Menu Page 1 1. SXM icon: Touch to view the SOURCE MENU and select a new playback source. 2. Band indicator - Displays SiriusXM® radio band currently selected. 3. Equalizer setting indicator: Displays the current equalizer preset setting. 4. EQ : Touch for quick access to the Equalizer level settings menu. 5.
VM9725BT 9. Next ( ) icon: Touch to tune to the next channel. 10. Category/Channel icon: Touch to toggle the icon displayed between Category and Channel. 11. Previous ( ) icon: Touch to tune to the previous channel. 12. List icon: When the Category icon is displayed, touch List to go to the Category Screen. When the Channel icon is displayed, touch List to go to the Channel Screen. 13. Direct icon: Touch to display the Direct Entry Menu. 14.
VM9725BT Switching to SiriusXM® Radio • Touch the top left corner of the screen (the radio box) to view the Source Menu. Touch the SiriusXM icon. • Press the SRC button on the front panel to switch to the SXM source. Selecting the SiriusXM® Band Touch the Band icon on the screen to change between the following bands: Band1, Band2, and Band3. Seek Tuning • To seek the next higher channel, touch the • To seek the next lower channel, touch the icon. icon.
VM9725BT Using Preset Stations Ten numbered preset buttons store and recall channels for each band. All ten stored channels for the current band appear on the screen. Storing a Channel 1. Select a band (if needed), then select a channel. 2. On the SiriusXM® menu page 2, touch the Mem icon to access the Preset Screen. 3. Touch the preset number (P1 through P10) in which you would like to store the current channel (or touch the X icon to cancel and close the menu).
VM9725BT Searching for a Channel Search by Channel To search by channel: 1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed) to select Channel. 2. Touch List to display the Channel Screen: 3. Touch a channel to tune to that channel. Search by Category Categories group music by type such as jazz, rock, classical, etc. To search by category: 1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed) to select Category. 2.
VM9725BT SXM Mature Channel Lock SiriusXM® attaches a label to channels with adult content. The radio recognizes these channels as “Mature”. The Mature Channel Lock option allows you to lock out channels with “Mature” labels. These channels will still appear in the channel listing (with a lock symbol), but will not be tunable unless the parental lockout password is correctly entered. Lock Mature Channels To lock mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon.
VM9725BT Temporarily Unlock a Mature Channel When the global “Mature Lock” is enabled, a mature channel can be temporarily unlocked until the channel is changed. This mode is useful for listening to mature/ adult content on a temporary basis, allowing you to listen on a locked channel without having to disable the global “Mature Lock.” To temporarily unlock a mature channel: 1. Tune to a mature channel. If the channel is locked, Chan Locked will appear on the SiriusXM® User Interface tuner screen.
VM9725BT Unlock All Mature Channels To unlock all mature channels: 1. On the SirusXM® menu page 2, touch the Lock icon. The following screen appears: 2. Enter your 4-digit password and then press the ok icon. The following screen appears: 3. Touch the Unlock ALL icon. All channels are now unlocked.
VM9725BT Change Lock Password The Change Lock Password option allows you to change the password from the default or current custom password to another password. NOTE: The default password is 0, 0, 0, 0. To change a password: 1. Touch the CHGPW icon. The following screen appears: 2. Enter your 4-digit password and press the ok icon. 3. Enter the new 4-digit password and press the ok icon. The new password is set.
VM9725BT SiriusXM® Radio Advisory Messages SiriusXM® user advisory messages are listed below: Advisory Displayed Cause Check SXM Tuner Check the SiriusXM® tuner connection on the back of the unit to ensure that it’s correctly connected. Check SXM Antenna Ensure the SiriusXM® antenna cable is connected to the SiriusXM® tuner correctly. Check the SiriusXM® antenna wire for breaks or sharp bends. Replace the antenna if necessary. If the message remains, the antenna may have been damaged.
VM9725BT REAR CAMERA OPERATION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by the gear selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT DETECTED” will appear, indicating the function is not available. When the camera is installed, the rear view image of what is behind the vehicle will appear when the vehicle is placed in reverse gear.
VM9725BT TROUBLESHOOTING Table 6: Troubleshooting Problem Cause Corrective Action Radio Fuse blown Install a new fuse with the correct rating Car battery fuse blown Install a new fuse with the correct rating Illegal operation Press the RESET button located over the rotary encoder on the front panel Improper audio output connection Check wiring and correct Volume set too low Increase volume level Improper “MUTE” connection Review wiring diagram and check “MUTE” connection Speakers damaged Rep
VM9725BT Problem Cause Corrective Action Incorrect connection to parking brake wire Check wiring and correct Parking brake is not engaged Stop vehicle in safe place and apply parking brake Flashing image or interference appears on screen DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Prolonged image or improper height/ width ratio display Improper aspect ratio setup Use correct aspect ratio setti
VM9725BT Problem Cause Corrective Action Disc does not play back Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upside down Insert disc with
VM9725BT Disc Error Messages Message Displayed Cause Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc not present in loading compartment Insert disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Bad Disc Corrective Action Unknown disc Disc format is not Use compatible disc compatible with this unit Region Error DVD is not compatible with region code of unit Us
VM9725BT Care and Maintenance 1. 2. 3. 4. 5. 6. 7. 8. 86 Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VM9725BT SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Tuning Ra
VM9725BT General Auxiliary Input impedance: 10k Power Supply: 11 to 16VDC, negative ground Power Antenna (Blue): 500mA max, current limited protection Amplifier Remote (Blue/White): 500mA max, current limited protection Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATO type DIN chassis dimensions: 7” X 7” X 4” (178mm x 178mm x 100mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Re
VM9725BT Common Replacement Parts Owner’s Manual and Install Manual 30613600 Wire Harness 30313600 Trim Rings (Main and Secondary-Packaged Together) 30413590 External Microphone 30443240 Remote Control 30713600 Parking Wire 38213030 Sleeve and Mounting Brackets 30113270 Hardware Bag 30513270 89
VM9725BT Notes 90
VM9725BT Notes 91
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.mobile.jensen.