Owner's Manual

VM9214BT

Error Messages

Care and Maintenance

1. Use only a clean silicone cloth and neutral detergent to clean the front

panel or monitor. A rough cloth and non-neutral detergent (such as alco-

hol) may result in scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a protective circuit

automatically stops play of the disc. If this occurs, allow the unit to cool

before operating the player again.

4. Never insert anything other than a 5” (12 cm) compact disc into the player

as the mechanism can be damaged by foreign objects.

Interruption

occurred dur-

ing playback

Disc is dirty or scratched Clean disc or replace

File is damaged/bad

recording

Recreate disc with good files

Incorrect play-

back message

displayed

Message is longer than

LCD can display

Table 7: Error Messages

Message

Displayed

Cause Corrective Action

Loading Disc is being read

No Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up

Disc not present in loading

compartment

Insert disc

Bad Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up

Unknown

disc

Disc format is not compatible

with this unit

Region Error DVD is not compatible with

region code of unit

Error Illegal mechanism operation Press EJECT key for 5 seconds to

reset loading mechanism

Table 6: Troubleshooting

Problem Cause Corrective Action