AM/FM Dual Alarm Auto Time Set Clock Radio Instruction Manual

AUTO TIME SET

This unit features an Automatic Time Set system powered by 2 X “AA”

batteries (3V DC) (Included), so you do not need to set the clock time

when first plugged in. After the unit is plugged in, the LED display will

show the current time automatically after you set the time zone and

daylight saving time for desired area.

SETTING THE TIME ZONE

Change to your time zone area by sliding the TIME ZONE switch on

the back of the unit to the appropriate time zone you live in. The default

time zone is set to Eastern Standard Time (EST). Please refer to the

time zone map below when setting the switch position on the back.

1. Eastern Standard Time (EST)

2. Central Standard Time (CST)

3. Mountain Standard Time (MST)

4. Pacific Standard Time (PST)

DAYLIGHT SAVING TIME

Slide the DST (Daylight Saving Time) switch on back of the unit to turn

Daylight saving time on/off. The clock comes with DST in the ON position

as the default. This setting is correct unless you live in Arizona or parts of

Indiana where DST is not observed.

IMPOTANT: Do not change this setting unless you live in an area which

does not observe the Daylight Saving time change.

NOTE: The batteries will become weak after time, so replace the

batteries as needed. To avoid re-program the time and alarm settings,

we recommend leaving the unit plugged in when changing the batteries.

PST MST CST EST