installation instructions
34
6. Lift clip up on the oven bake burner electrode bracket
withanger or at-blade screwdriver.
7. Pull electrode out of bracket.
8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orice spud, then remove by turning the
gas orice spud counterclockwise and lifting out. Set gas
orice spud aside.
9. Gas orice studs are stamped with a letter and a number.
Install the Number 154 oven bake burner orice spud.
10. Place Propane gas orice in plastic parts bag for future use,
and keep with package containing literature.
11. Push down on the clip on the electrode bracket.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip