Installation Instruction
22
6. Pull electrode out of bracket.
7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orice spud, then remove by turning the
gas orice spud counterclockwise and lifting out. Set gas
orice spud aside.
8. Gas orice studs are stamped with a letter and a number.
Install the Number 125 oven bake burner orice spud.
9. Place Natural gas orice in plastic parts bag for future use,
and keep with package containing literature.
10. Push down on the clip on the electrode bracket.
11. Replace oven bake burner electrode inside bracket.
12. Reinstall the oven bake burner and oven bake burner
screws. See Step 4 for illustration.
13. Replace oven bafe and oven bafe nuts. The front holes will
be aligned, and a click will sound when bafe is seated.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket