use and_care_guide

29
6. Wipe off griddle.
7. Remove, empty, and clean drip tray.
Clean the drip tray with warm, soapy water. Wipe the area
under the drip tray clean. Once dry, put the drip tray back in
position.
Once cool, wipe the griddle with a clean, damp terry
cloth towel. Then buff with a microber cloth. If streaking,
rainbowing, or ghosting occurs, use a mixture of 1 part white
vinegar to 2 parts water on a towel to wipe the griddle.
Fold a damp towel and, with the pad holder or wooden spoon,
go over the griddle to remove remaining residue.
4. Remove remaining residue.
5. Turn off griddle and let cool.
COOKTOP CONTROLS
1. Remove knobs.
2. Clean with warm, soapy water.
Know Your Cooktop Controls
To avoid damage to the cooktop controls, do not use steel
wool, abrasive cleansers, or an oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the Off
position.
When replacing knobs after cleaning either the surface
burner controls or the griddle module control, make sure the
knobs are replaced to the correct location. See the “Knob
Variations” section for reference.
Pull the knobs straight away from the control panel to remove.
STAINLESS STEEL
Use cleaner or wipes.
Do Not Use:
Soap-lled scouring pads
Abrasive cleaners
Cooktop polishing creme
Steel-wool pads
Gritty washcloths
Abrasive paper towels
Use affresh
®
Stainless Steel Cleaner or affresh
®
Stainless Steel
Cleaning Wipes (not included). Rub in direction of grain to
avoid possible damage to the steel surface.
CARE AND CLEANING