Owner's Manual

14
Double Ovens
The positioning of the oven feet allow a double oven to be
installed in a cutout height between 48
7
/
8
" and 52
3
/
16
" (124.1 cm
and 132.6 cm). Refer to the following instructions to position the
feet for the size of your cabinet cutout.
Cutout Height is Between 48
7
/
8
" and 50
7
/
16
" (124.1 cm and
128.1 cm)
The oven feet do not need to be changed. They are positioned
correctly as received.
NOTE: Do not remove the spacers.
Go to the “Make Electrical Connection” section.
A. Spacers
NOTE: The feet for the unit are not included with your oven.
Please refer to your serial tag for the service number to call and
request at no charge.
Cutout Height is Between 50
1
/
2
" and 51
1
/
8
" (128.2 cm and
129.9 cm) or For Flush Installation
NOTE: The feet for the unit are not included with your oven.
Please refer to your serial tag for the service number to call and
request at no charge.
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a foot on the left rear spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. In the same manner, install a foot on the right rear of the oven.
4. Install a front foot on the left front spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the inside of the oven.
A. Front Foot
B. #8-18 x 3/8" (9.5 mm) screw
C. Spacer
5. In the same manner, install a front foot on the right front of the
oven.