Instructions / Assembly

Owner’s / Operator’s Manual

Weed Raker

Model # WRK09

Ref. Number Part Number Description Quantity

WRKRH09 Rake Head 1

WRKEC09 End Cap 2

WRKBH09 2” Bolt, and nut 4

WRKTS09 Tines (teeth) 12 pairs

WRKHF09 Handle section for Rake head 1

6(a,b)

WRKSB09 Support Bracket 2

WRKHC09 Handle Connector 3

8 , 9

WRKHD09 Handle 3

WRKBE09 1.75” Bolt, and nut 1

WRKBC09 Black end cap 1

WRKRP09 Rope 1

Please refer to the Ref. Number when assembling the tool and Part Number when placing order for replacement part

Parts List

PAGE 1
Owner’s / Operator’s Manual Weed Raker Model # WRK09 Parts List Ref. Number Part Number Description Quantity 1 WRKRH09 Rake Head 1 2 WRKEC09 End Cap 2 3 WRKBH09 2” Bolt, and nut 4 4 WRKTS09 Tines (teeth) 5 WRKHF09 Handle section for Rake head 1 6(a,b) WRKSB09 Support Bracket 2 7 WRKHC09 Handle Connector 3 8,9 WRKHD09 Handle 3 10 WRKBE09 1.75” Bolt, and nut 1 11 WRKBC09 Black end cap 1 12 WRKRP09 Rope 1 12 pairs Please refer to the Ref.
PAGE 2
Assembly Instruction Place one end cap (2), into the Rake Head (1). Secure the end cap with the bolt and lock nut (3). Insert rake teeth (4) into the channel at the bottom of the rake head and slide down to the end cap(there are 12 pairs of teeth). The teeth should curve toward the handle. When all of the teeth have been inserted, insert the second end cap (2) into the rake head and secure in place with the bolt and lock nut (3).