Instructions / Assembly

Installation Instructions
for Siteline
®
Wood/Clad Wood Casement and Awning Pocket Windows (JII-90020)
8
4
POCKET WINDOW INSTALLATION AND FASTENING (CONTINUED)
Casement Picture Window Installation
NOTE: This unit should be fastened through the head and sides. The
bottom screen stop, head screen stop and both side screen stops must be
removed to expose pre-drilled fastener holes.
Head ller
Sill ller
Head
stop
Bottom
screen
stop
Side
screen
stop
Side ller
Screen Stop Removal:
• First, remove the head stop.
Start at one end and insert
a putty knife between the
window frame and the
stop. Working along the
stop, pry away from the
frame to dislodge the part.
Use care and minimal
force when prying
to avoid damage to
wood parts (wood
parts are held in place
by a vinyl, double-
barbed spline).
• Next, repeat steps to
remove the bottom screen
stop from the sill of
thewindow.
• Last, remove both side screen stops. Start at one end and insert a putty
knife between the window frame and the stop. Working along the
stop, pry away from the frame to dislodge the part.
• Set all wood parts aside in a safe and dry location.
Exterior Installation:
See “Casement/Awning Pocket” exterior installation.
Interior Installation:
See “Casement/Awning Pocket” interior installation.