Warranty

Effective July 1, 2010 to January 31, 2014

Page 3 of 3

 Incidental or consequential damage. Some states do not allow the exclusion or limitation of incidental or consequential

damages, so this may not apply to you.

Important Legal Information

This Limited Warranty document sets forth our maximum liability for our products. We shall not be liable for special, indirect,

consequential, or incidental damages. Your sole and exclusive remedy with respect to any and all losses or damages

resulting from any cause whatsoever shall be as specified above. We make no other warranty or guarantee, either express or

implied, including implied warranties of merchantability and fitness for a particular purpose to the original purchaser or to

any subsequent user of the product, except as expressly contained herein. In the event state or provincial law precludes

exclusion or limitation of implied warranties, the duration of any such warranties shall be no longer than, and the time and

manner of presenting any claim thereon shall be the same as, that provided in the express warranty stated herein. This

Limited Warranty document gives you specific legal rights, and you may have other rights that vary from state/province to

state/province.

No distributor, dealer or representative of JELD-WEN has the authority to change, modify or expand this warranty. The original

purchaser of this Product acknowledges that they have read this warranty, understand it and are bound by its terms and agrees

to provide this warranty to the original owner of the structure into which the Product is installed.

“JELD-WEN Products” shall refer to vinyl window and patio door products (except United Collection products) manufactured in

the United States and/or Canada and marketed under the JELD-WEN brand name for use in the United States and/or Canada. See

our separate United Collection warranty, or our Export Warranty for applicable coverage on products used outside the United

States and Canada.

“Skilled labor” refers to tasks where specialized technical knowledge, experience, methods or tools are required to properly

identify, diagnose and/or correct product-related problems.

Fading or changing in color of the applied exterior color finish is not a defect unless it exceeds five (5) E units, calculated in

accordance with ASTM D2244, paragraph 6.2. Color change shall be measured on an exposed colored surface that has been

cleaned of soils, and the corresponding values measured on the original or unexposed colored surface. Fading or color changes

may not be uniform if the surfaces are not equally exposed to the sun and elements. If the above ASTM standards change, the

standard in effect at the time of purchase applies. As an option to replacement, we may choose to refinish the product.