Instructions / Assembly
INSTALLATION INSTRUCTIONS
4
©2011 JELD-WEN, inc.; This publication and its contents are owned by JELD-WEN, inc. and are protected under the U.S. Copyright Act and other intellectual
property laws. All trademarks, service marks, logos and the like (whether registered or unregistered) are owned or controlled by JELD-WEN, inc. or others.
Unauthorized use or duplication of JELD-WEN intellectual property is prohibited.
JELD-WEN reserves the right to change product specications without notice. Please check our website, jeld-wen.com, for current information.
INSTALL LOCKSET AND FINISH INSTALLATION
hole for the lockset
the top of the slab
the edge, depending
on the latch. For
slabs that have
center of the slab,
the lockset should
be centered in this
manufacturer's
the edge of the slab into the center of the lock hole to accommodate
or rectangular face plate that will require the slab edge to be
chiseled for t. Drill pilot holes for attachment screws. Other latches
hammer.
COMPLETE INSTALLATION
4
Lockset
hole
Rail
Panel
Latch
hole
(10/11)
done.
Please visit jeld-wen.com/resources for nishing instructions, warranty and care and maintenance information.
Thank you for choosing