Operating Guide

PRODUCT GUIDE
Wood Casement & Awning Windows (JPG009)

Long Operator Arm
1. Position the end of the long operator arm to line up with the
arrow on the operator track.
2. Depress operator arm with a at head screwdriver and disengage
from the sash.
1VTITBTIGVMMZ
open.
4. Crank operator
to the closed
position to move
arms out of the
way.
4FDVSFMZHSJQUIF
sash. A second
person may be
needed.
*GUIFIJOHFBSN
has a retaining
clip, pull the clip
off of the hinge
arm stud on the
frame. If not, pry
hinge arm off of
stud with a at
head screwdriver.
7. Pry hinge arm off
of the hinge track
stud at bottom,
then top of
window. At this
point, hinge arms
should be loose.
Securely hold the
sash to keep it from falling.
4MJEFTBTIUPXBSEUIFDFOUFSPGXJOEPXUPEJTFOHBHFGSPNCPUI
upper and lower hinge tracks.
9. Slightly tilt sash and remove.
BUTT-HINGED SASH
REMOVAL
1. Detach operator arm.
2. Lift sash up to
disengage butt
hinges and
remove.
INSTALLATION
1. Firmly grip sash.
2. Lift sash and
reengage hinges.
3FBUUBDI
operator.
SASH REMOVAL & INSTALLATION - CONTINUED
4. This step releases
the sash from the
frame, use help to
safely support sash.
On the top hinge,
rotate the retainer
toward the interior
90
o
and lift the stay
out of the guide
slot to separate the
two halves of the stay.
-JGUUIFTBTIVQPGGPGUIFCPUUPNIJOHFBOESFNPWF
5PSFJOTUBMMQFSGPSNSFNPWBMTUFQTJOSFWFSTFPSEFS8IFO
reinstalling the top hinge, the locking pin must be inside the keeper.
It may be helpful to hold the end of the stay up while pushing down
at the guide pin when sliding the sash back into place.
TILT & TURN CASEMENT SASH
1. Move handle to
the turn position
(handle horizontal,
sash opens like a
door).
2. Open the sash 90
o
and support.
0OUIFCPUUPN
hinge, pull the
release clip away
from the hinged
side.
Shown
from
Bottom
Release
clip
Retainer
Locking
pin under
here
Stay
Operator
track
Arrow
Long operator
arm
Sash