Installation Guide

InstallatIon InstructIons
for Vinyl Patio Doors without Nailing Fin (JII015)
7
7
COMPLETE INSTALLATION
1. For continuous slab
landings, apply a
1/4" bead of sealant
around the sill where
it meets the slab.
Leave 1" gaps at the
weep holes as shown.
2. Ensure sealant on
back dam of the sill
pan fully seals to
the inside face of
the sill. Apply more
sealant as necessary
to ensure an airtight
seal.
For Premium vinyl
doors, the bumper
lays over the track
and against the jamb
opposite the operating
panel.
INSTALL BUMPER
For Builders vinyl
series doors, install
the bumper in the
stationary panel side
jamb at vertical center
using the 1" self-
tapping screw provided.
Builders
Patio Door
Strike
plate
Interior
Bumper
Strike
plate
Interior
Premium
Patio Door
Bumper
INSTALL DRIP CAP - OPTIONAL UNLESS REQUIRED BY LOCAL CODE
We recommend as a
best practice to install
a drip cap. For nless
doors, use z ashing
and integrate into the
weather barrier. For
doors with a ush n,
cut a groove in stucco,
ll with sealant and
insert horizontal leg of
drip cap.
Components
shown after
installation is
complete
Stucco
Flush
n
Head
ashing