Dimensions Guide

Door Design Heights* # of Panels Thickness Widths* 2 doors or 1 unit Widths* 4 doors or 2 units
Arlington 6'7"; 6'11"; 7'11" Three 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Atherton
®
6'7"; 6'11"; 7'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Avalon
®
6'7"; 6'11" Three 1-3/8" 2'0"; 2'6"; 3'0" 4'0"; 5'0"; 6'0"
Bostonian
®
6'7"; 6'11"; 7'11" Three 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Bristol 6'7"; 6'11"; 7'11" Three 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Cambridge 6'7"; 6'11"; 7'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Camden
®
6'7"; 6'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Colonial 6'7"; 6'11"; 7'11" Three 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Continental
™
6'7"; 6'11"; 7'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Craftsman III
™
6'7" Two 1-3/8" 1'8", 1'10", 2'0"; 2'2", 2'4"; 2'6"; 2'8", 2'10", 3'0" 4'0"; 5'0"; 6'0"
Princeton 6'7"; 6'11"; 7'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Provincial
®
6'7"; 6'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Rockport 6'7"; 6'11" Five 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
Santa Fe 6'7"; 6'11"; 7'11" Two 1-3/8" 2'0"; 2'4"; 2'6"; 2'8"; 3'0" 4'0"; 4'8"; 5'0"; 5'2"; 5'6"; 6'0"
bIFOLDS
* All panel, inner stile, top rail and lock rail measurements will match those listed above. Outer stile measurements may vary 1/4" (depending on pre-fit).
All bottom rail measurements will be 1" shorter than the measurements listed above in order to accommodate track and hardware.
Bifolds are available in alternate heights and widths. Please contact your local JELD-WEN facility for specifications and availability of alternate sizes.
All bifolds are boxed (or end-capped) with track and hardware included.
BIFOLD DOORS
Width Height
# of
Panels
Thickness
Panel
Width
Outer
Stiles*
Center
Mullion
Top Rail Lock Rail Bottom Rail
Sticking
Profile
Surface
3'0"
Arlington
6'8"
7'0"
Six
1-3/8"
1-3/4"
9" 6-1/2" 5"
5-9/16" (6'8")
7-9/16" (7'0")
6-7/16"
10-1/2" (6'8")
12-1/2" (7'0")
B Smooth
3'0"
Continental
6'8"
7'0"
Two
1-3/8"
1-3/4"
24" 6" N/A
5-1/4" (6'8")
7-1/4" (7'0")
4-3/16"
10-13/16" (6'8")
12-13/16" (7'0")
O Smooth
3'0"
Colonial
6'8"
7'0"
Six
1-3/8"
1-3/4"
9-1/8" 6-7/16" 4-7/8"
4-1/2" (6'8")
6-1/2" (7'0")
6-7/16"
10-9/16" (6'8")
12-9/16" (7'0")
O
Oak
Grain
COMMERCIAL WIDE STILE
Sticking Profile: B=Beaded, MCB=Modified Cove and Bead, O=Ovolo, C=Craftsman
*Assuming standard bore machining (2-1/8" diameter bore), outer stile measurements listed above must be no less than 3-3/4" in order to accommodate a
2-3/8" backset on the lock hole. For 2-3/4" backsets, outer stile measurements must be no less than 3-13/16". If lock bore machining is less than the outer
stile measurements listed above, all lock bore drilling must be done within the lock rail for best appearance and performance. Outer stile dimension may vary
1/4" from the measurements listed above.
37