Brochure

What This Warranty Does NOT Cover
JELD-WEN is not liable for:
Normal wear and tear; natural weathering of surfaces.•
Normal wear and tear to hardware and naturally occurring •
Damage caused by chemicals (e.g. brick wash) or a harsh •
environment (e.g., salt spray or airborne pollutants).
Product failure due to misuse or abuse; damage caused by •
security systems), or as a result of any cause beyond the control
and acts of third parties outside of our reasonable control).
•
Slight imperfections or wavy distortions in the glass that don’t •
impair structural integrity. Note: wavy distortions in the glass
(e.g. related to laminate interlayer or heat strengthening of
glass) are not considered a defect. Slight color variations in
glass are not considered a defect.
Improper installation not in conformance with JELD-WEN •
installation instructions (note: see www.jeld-wen.com for
current installation instructions);
operational problems and
construction.
Damage or poor product performance resulting from •
installation into a condition that exceeds product design
is not in compliance with building codes.
•
exposure (e.g., where storm doors/windows are present).
Product or component performance decline due to aging, •
inert gas dissipation, natural processes or failure to provide
proper maintenance. Note: Other than inert gas loss due to
seal failure, the migration of an inert gas, such as argon, is a
natural process that occurs over time and is not a defect.
Screen damage due to normal wear and tear, misuse, abuse, or •
Condensation or damage as a result of condensation (Note: •
unless due to insulating glass failure, most condensation
problems are related to excessive humidity levels in a structure.
Contact a heating/air conditioning specialist for help).
•
or the removal or disposal of defective product(s); labor
Incidental or consequential damage. Some states do not allow •
the exclusion or limitation of incidental or consequential
damages, so this may not apply to you.
Important Legal Information
This Limited Warranty document sets forth our maximum
liability for our products. We shall not be liable for special,
indirect, consequential, or incidental damages. Your sole and
exclusive remedy with respect to any and all losses or damages
We make no other warranty or guarantee, either express or
implied, including implied warranties of merchantability and
to any subsequent user of the product, except as expressly
contained herein. In the event state or provincial law precludes
exclusion or limitation of implied warranties, the duration of
any such warranties shall be no longer than, and the time and
manner of presenting any claim thereon shall be the same
as, that provided in the express warranty stated herein. This
you may have other rights that vary from state/province to
state/province.
No distributor, dealer or representative of JELD-WEN has the
authority to change, modify or expand this warranty. The original
purchaser of this Product acknowledges that they have read this
warranty, understand it and are bound by its terms and agrees to
provide this warranty to the original owner of the structure into
which the Product is installed.
1
“JELD-WEN Products” shall refer to vinyl window and patio
door products (except United Collection products) manufactured
in the United States and/or Canada and marketed under the
JELD-WEN brand name for use in the United States and/or Canada.
See our separate United Collection warranty, or our Export
Warranty for applicable coverage on products used outside the
United States and Canada.
2
“Skilled labor” refers to tasks where specialized technical
knowledge, experience, methods or tools are required to properly
identify, diagnose and/or correct product-related problems.
3
accordance with ASTM D2244, paragraph 6.2. Color change
shall be measured on an exposed colored surface that has been
cleaned of soils, and the corresponding values measured on the
original or unexposed colored surface. Fading or color changes
may not be uniform if the surfaces are not equally exposed to
the sun and elements. If the above ASTM standards change, the
standard in effect at the time of purchase applies. As an option
© 2010, JELD-WEN, inc. | JELD-WEN and ImpactGard are registered
trademarks of JELD-WEN, inc., OREGON, USA.