Use and Care Guide
PRODUCT GUIDE
Interior & Exterior Doors (JPG013)
4
DOOR SWEEP (INSWING DOORS ONLY)
The door sweep is mounted on the bottom of the door slab and lls the
the threshold, the door sweep may lose its shape and cease to provide
an effective seal.
padded work surface.
door sweep with
needle nose pliers or
side cutters.
loose by starting at
one end and working
to the other.
rail with putty knife.
to same length as the
existing one.
sealant.
other.
ORDERING NEW WEATHERSTRIP
inltration control. Check placement and quality of weatherstrip.
have weatherstrip in the astragal.
Information for Replacement Weatherstrip
Color
2. For each type of weatherstrip, add all measurements, then add an
4. Fill out the following table.
Possible Weatherstrip Locations on Double Doors
FRAME/THRESHOLD/ASTRAGAL/MULLION WEATHERSTRIP
the side and the head
weatherstrip in the
frame, install head
weatherstrip rst.
runs vertically along
the two slabs of double
1. Open active panel.
2. Grip weatherstrip
and gently pull out
of kerf.
frame weatherstrip,
if applicable, trim
and overlap the new
weatherstrip in the
same way as the old
weatherstrip.
1. Cut new weatherstrip
to length.
barb into the kerf
from one end to the
other.
Threshold
Head
weatherstrip
weatherstrip