Use and Care Manual

5
CLEANING GLASS – CONTINUED
HARDWARE CLEANING & LUBRICATION
HARDWARE CLEANING
STUBBORNSTAINREMOVAL
Commercial glass cleaning products may be necessary.
• Applysmallamountdirectlytothestain.Avoidspillingor
dripping down the glass.
• Somepersistentstainsmayneedhigherstrengthcleaning
solutions that contain active ingredient chemicals such as
denatured alcohol or acetone. Special care must be taken
when using these types of cleaners.
• Foroilandgrease:trybakingsodaandwaterorwashing
soda and water.
MORE INFORMATION ON GLASS CLEANING
• TheGlassAssociationofNorthAmerica(GANA):
www.glasswebsite.com
• CardinalGlassIndustries:www.cardinalcorp.com
Note on Websites! Website content is subject to change and
should be used for informational purposes only. JELD-WEN is
not responsible for third-party information.
Maintain hardware any time windows are not opening or
closingproperlyoratleastbi-annually(monthlyforcoastal
areas)for:
• Cleandirt/debris
• Tightenloosescrews
• Replacedamagedhardware
PRECAUTIONS
The following substances may damage protective hardware
nishes. Do not use:
• Vinegar-basedcleaners
• Citrus-basedcleaners(lemon,etc.)
• Paintremovers
• Windowcleaners
• Brick/sidingwashes
• Anyotherindustrialorabrasivecleaners
Use caution with silicone-based sprays. Apply only in small
amountsanddonotoverspray.Wipeoffexcesslubricantto
avoid staining and/or damage to other window or patio door
parts. Silicone may cause some hard plastic parts to become
brittle and cause problems with nishing or renishing wood
surfaces.
HARDWARE TYPES
Metal hardware offers functionality, aesthetic appeal and
resistance to corrosion, but is not totally corrosion proof.
Replace corroded hardware.
Plastic hardwareoffershighresistancetotheelements;
however, over time, can deteriorate from ultraviolet light,
heat,cold,andchemicalexposure.
Brass hardware has a special protective lm to reduce/
eliminate polishing and requires special care.
General Cleaning
1. Remove hardware for easier cleaning.
2.Usemildsoapandwateronasoftclothorsponge;rinse
and wipe dry. For stubborn dirt, use a soft bristle brush to
gently scrub.
3.Applyseveralcoatsofhighquality,non-abrasivecarwax.
4. Reinstall hardware.
TarnishCleaning(BrassHardware)
This section does not apply to brass-plated hardware. The
following cleaning and polishing procedure is recommended
by a brass hardware company.
1. Carefully remove hardware.
2.Gentlycleanwithextranesteelwool(No.0000)soaked
in light oil or mild soapy water.
For tough-to-clean brass hardware:
a. Soak overnight in lacquer thinner or paint reducer.
b. Dry completely.
c. Applybrasspolishtodryhardware(followinstructions
onmanufacturer’slabel).
d. After polishing, apply several coats of high quality,
non-abrasivecarwax.
e.Prolongnishwithfollow-upwaxapplications.
3. Reinstall hardware.
Heavy Cleaning
Solvents, abrasives, and other cleaners could cause damage
to protective coatings on hardware. If the general cleaning
procedure is not sufcient, call us for recommendations.
Cleaning and lubrication help to maintain and restore smooth operation to movable parts of windows and patio doors and, in most
cases, offer corrosion protection. Always thoroughly clean hardware before lubricating.