User Guide

18
• You use your computer’s Ethernet port to connect to the internet, and you want to
stay connected while you use your Lemur.
• You use a wireless connection to the internet with a wireless router, and you would
like to access your Lemur wirelessly by connecting it to your router.
• You have several Lemur devices you would like to use to control your computer at
the same time (lucky you!).
You may want to connect your Lemur directly to you computer with a single cable if any
of the following are true:
• Your Lemur is the only Ethernet device you have (either because you don’t own any
others or you connect wirelessly to other Ethernet network devices)
• You are looking for the simplest possible configuration for live performance
First, we’ll discuss the Lemur Settings Window where you can setup the Lemur side of
your configuration. Then we’ll discuss how to configure your Lemur in the direct
connection and router scenarios.
Basic Setup Using the Lemur Settings Window
• Press the Settings button on top of the Lemur. You’ll see the following screen,
although the details will be different for your setup.