HULALA H O M E ITEM NO.SBHM0574 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A D F G E F K J C I H L B L M L L 2PERSONEN OVERVIEW 03/26
PARTS LIST A x1 B x1 C x1 D x1 E x1 F x2 G x1 H x1 I x1 J x1 K x1 L x4 M x1 04/26
HARDWARE LIST #1 x52 #2 x26 ∅3.
HARDWARE LIST #3 x16 ∅3.
ASSEMBLY INSTRUCTIONS STEP-1 Use bolt #4、spring washer #6 and plat washer #5 to attach leg (L) to the corresponding hole of part (B) as picture show，tighten bolt #4 with allen key #15.
ASSEMBLY INSTRUCTIONS STEP-2 Screw leg (M) into the corresponding hole of part (B) with hand.
ASSEMBLY INSTRUCTIONS STEP-3 Insert panel (E)&(D) into the corresponding hole of part (B) ，make sure all holes aligned and use allen key #15 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS STEP-4 Insert panel (C) into the corresponding hole of part (B) ，make sure all holes aligned and use allen key #15 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS Use screw #3 to attach part #9 to the corresponding hole of top panel (A)，make sure all holes aligned and tighten screw #3 with screwdriver #16. #16 #3x16 #9x4 #3 #3 #9 #9 A #9 x4 #3 x16 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-6 Insert top panel (A) into the preassemble unit at step 4，make sure all holes aligned and use allen key #15 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS STEP-7 Open the panel (G), insert panel (G) into the groove of preassemble step 6，make sure all holes aligned and use screw #2 to attach it ，tighten screw #2 with screwdriver #16.
ASSEMBLY INSTRUCTIONS STEP-8 Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-9 Insert shelf holder #10 into the corresponding hole of panel (C)&(E)&(D),make sure shelf holders #10 are level，and then attache panel (F) to it.
ASSEMBLY INSTRUCTIONS STEP-10 Use screw #1 to attach hinge #7 to doors (H)&(K)，make sure all holes aligned and tighten screw #1 with screwdriver #16. When installing hinge，please pay attention to distinguish the category of hinge!!!! #16 #1x8 #7x4 #1 #7 #1 #7 #1 K #7 #1 #7 H #7 x4 #1 x8 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-11 Aligne the corresponding hole of preassembled doors (H)&(K) with the corresponding hole of side panel (C)&(D)，and then use screw #1 to attach hinge #7 to side panel (C)&(D),tighten screw #1 with screwdriver #16. A A #1x16 C&D H&K #7 #16 C&D H&K F A D F E K F C B H #1 x16 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-12 Use screw #1 to attach hinge #8 to doors (I)&(J)，make sure all holes aligned and tighten screw #1 with screwdriver #16. #16 When installing hinge，please pay attention to distinguish the category of hinge!!!! #1x8 #8x4 #1 #8 #1 #1 #8 #8 J #1 #8 I #8 x4 #1 x8 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-13 Aligne the corresponding hole of preassembled door (I) with the corresponding hole of middle vertical panel (E)，and then use screw #1 to attach hinge #8 to middle vertical panel (E),tighten screw #1 with screwdriver #16. A A #1x8 E I I #16 E #8 A E I #1 x8 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-14 Aligne the corresponding hole of preassembled door (J) with the corresponding hole of middle vertical panel (E)，and then use screw #1 to attach hinge #8 to middle vertical panel (E),tighten screw #1 with screwdriver #16. A #1x8 J #8 A E #16 E J A E J #1 x8 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-15 Concealed hinges are three-way adjustable: Do or Sid e pa ne ls Do or Sid ep an els Horizontal by screw adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Sid ep an els In-and-out by loosening the hinge arm mounting screw or via cam adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Vertical via slots in the mounting plate or via cam adjustment! Sid ep an e ls Hinge adjustment method 21
ASSEMBLY INSTRUCTIONS H& Do I&J or &k STEP-16 r o Do I&J k & & H Rebound adjustment method 22/26
ASSEMBLY INSTRUCTIONS STEP-17 Use screw #1 to attach plastic bracket #11 to back panel (G),make sure all holes aligned and tighten screw #1 with screwdriver #16. #11 #1 G #1x4 #16 #11x2 #11 x2 #1 x4 #16 x1 ∅3.
ASSEMBLY INSTRUCTIONS #11 x2 #12 x4 #13 x4 #16 x1 ∅3*35mm*7# STEP-18 1. Mark the position on the wall, that corresponds to the location of bracket #11 on the back panel G; Drill and insert the expandable screw #13 by hammer. 2. Assemble the bracket #11 to the wall. Align the hole in the bracket #11 with the expandable screw #13,use screw #12 to attach it,tighten screw #12 with screwdriver #16. NOT PROVIDED LL WA 1. L AL W #11 #12 2.
ASSEMBLY INSTRUCTIONS #14 x2 STEP-19 3. Let the plastic belt #14 pass through bracket #11 and pull tightly. 2. #11 #11 LL WA #14 1.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
