User's Manual

- 38 - UDEE / UDRE - 332170A revision02Fr En De PRELIMINARY
él ectron ique
5.5.3- Display of battery pack charge state
Two battery charge status display functions are provided on the transmitter :
• When the remote control is powered up (stop palmswitch button out), the
red indicator light on the transmitter shows the battery pack charge level :
Red indicator light off : ..................... Battery pack charge > à 90%
Red indicator light flashes slowly : .. Battery pack charge is between 90% and 10 %
Red indicator light flashes quickly : .. The battery pack must absolutely be charged
(battery pack charge < 10%)
• During operation of the remote control (radio transmission), a LOW BATT (battery low
level, charge < 10%) indication is given by the red indicator light which flashes quickly.
This indication is used to inform the operator that the remote control will soon be unavailable
(within around 15 minutes).
Only UBCU charger or UBC1 connector, from Jay Electronique are perfectly suited to
charge the UDB2 battery pack.
Charging the UDB2 battery pack
The red battery pack indicator light shows that battery pack is well supplied from the charger.
This indicator light does not swho the load level
UDEE transmitter red indicator light
RED indicator light
Charger UBCU
110-230VAC/12VDC
battery pack UDB2
Battery pack red indicator light
(power supplied, the battery
pack is in charge)