Instructions / Assembly

Instruction:
Step1:
Prepare the ground
，
Place the concrete paving moulds.Premix the concrete
，
pour concrete into the concrete paving stone moulds.
Step2:
Use a shovel or trowel to fill each mould cavity to the surface.Pat and smooth
the surface with a trowel.
Step3:
Remove the mould promptly,and smooth the concrete edges with a trowel until
the desired appearance is obtained.
Step4:
Repeat the above steps, you will end uo with a unique garden path walkway.
Notes:
1. Before you start,please read the instruction manual.In addition, you can also
search creative ideas on YouTube.
2. Do not make the concrete too wet.
3. Do not forget to clean with water after use, so that it can be used better next
time.
4. When the temperature is high,sprinkle water on the surface after
drying;when the temperature is low,cover with geomenbrance to keep warm.
The measures can prevent cracking and improve durability of the concrete.
Great for steeping stones paving garden patios, backyards, walkways,
etc.Various application scenarios, there is always one suitable for
you.