FAQ

FAQ:

Question: Can use quickcrete or a rapid set concrete?

Yes.

Question: Can this be used on an existing concrete patio?

Yes

Question: How do make the colored concrete?

Coloring concrete is typically done with dyes either added to the concrete or

applied after it has set.

Question:How many cubic ft of cement does the mold take?

1 bag of cement generally makes 3 full molds.

Question: Can these molds be used on an existing flat cement walkway?

For best results a dirt path with cement is the way to go

Question: What's the ratio from Portland cement and sand and water?

1 part Portland to 2 parts sand in a sand-only mix. Add gravel or crushed stone

to the dry mixture to a ratio of as much as 5 parts gravel to 1 part cement and

sand mixture.

Question: How are the pieces held together?

Each section of the mold forms an individual stone. They are not held together.

When you remove the mold, you can add sand or Polysweep in the cracks to

stabilize the walkway.