User's Manual
gure 1
gure 2
gure 3
How it Works:
5IF4VOCFBN¥"EWBODFE3FNPUF5SBJOFSTIPVMECFVTFEBTBUSBJOJOHBJE
for you and your pet. This specially designed system will shut o if there
JTBOFYDFTTPGDPSSFDUJPOTGPSFYBNQMFJGTPNFUIJOHJTMFBOJOHPOUIF
correction button or if there is continuous pressing. This is called Over
Correction Mode and will cause the unit to turn o and automatically reset.
IMPORTANT: 5IF4VOCFBN¥"EWBODFE3FNPUF5SBJOFSIBTBSBOHFPGVQUP
150 yards. For the best results at long ranges, hold the remote above your
head and point to the receiver. Other factors that may a ect range include
weather, terrain and other radio frequencies transmitted in the area.
OPERATING INSTRUCTIONS
Collar Battery Installation:
IMPORTANT: This step is to be completed
when the collar is NOT on your dog.
t3FNPWFUXPTDSFXTTFDVSJOHUIFCBUUFSZ
compartment using a cross head or Phillips
head screwdriver. (
g. 1)
t-JGUCBUUFSZDPNQBSUNFOUGSPNNBJOCPEZ
of collar. (
g. 2)
t*OTFSUUXP$3-JUIJVNDPJOCBUUFSJFT
into battery compartment. Batteries should
be placed with the positive side facing
down.
IMPORTANT: Follow orientation as
described on graphics illustrated on battery
compartment. (
g. 3)
t3FQMBDFCBUUFSZDPNQBSUNFOUXJUIUXP
$3-JUIJVNDPJOCBUUFSJFTCBDLJOUPNBJO
body. Note: The battery compartment can
only be assembled in one orientation, do not
force closed.
t5JHIUFOUIFUXPTDSFXTVTJOHUIFDSPTTIFBE
screwdriver, do not over tighten.
t5PUFTUUIFVOJUUVSOPOCZQSFTTJOHBOEIPMEJOHUIFNBJODPOUSPMCVUUPO
GPSTFDPOET5IFVOJUXJMMCFFQUXJDFBOEøBTIUXJDFMFBWJOHPOF-&%
illuminated to indicate which correction level is in use. To choose the right
DPSSFDUJPOMFWFMSFGFSUPUIF3&"%:5064&TFDUJPOPGUIJTNBOVBM
t5PUVSOPòUIFVOJUQSFTTBOEIPMEUIFNBJODPOUSPMCVUUPOGPSTFDPOET
5IFVOJUXJMMCFFQUXJDFBOEøBTIUXJDFMFBWJOHOP-&%TJMMVNJOBUFE
indicating the unit is o .
t8IFOSFQMBDJOHCBUUFSJFTBGUFSVTBHFZPVNVTUDPNQMFUFMZEJTDIBSHFUIF
collar by holding a plastic handle screwdriver across both stainless steel
QSPCFTGPSTFDPOET.BLFTVSFUIFNFUBMQPSUJPOPGUIFTDSFXESJWFSJT
touching both stainless steel probes and the unit is in the OFF position.
Remote Control Battery
Installation:
t3FNPWFUIFCBUUFSZEPPSGSPNCBDLPGUIF
remote control.
t*OTFSUPOFWPMUBMLBMJOFCBUUFSZ
g. 4)
t3FQMBDFCBUUFSZEPPSPOUIFCBDLPGUIFSFNPUF
control.
t5PUFTUUIFVOJUUVSOPOCZQSFTTJOHBOE
IPMEJOHUIFPOPòCVUUPOGPSTFDPOET5IF
power indicator light will illuminate GREEN.
(
g. 5)
COLLAR FITTING
1SPQFSöUPGUIF4VOCFBN¥"EWBODFE3FNPUF
Trainer is essential to establish a good training
foundation and optimal performance.
Note: Batteries should be installed properly and collar should be in the OFF
position before proceeding with tting the collar to your dog.
STEP 1:
&OTVSFEPHJTJOBSFMBYFEQPTJUJPO
STEP 2:8JUIUIFDPMMBSDMBTQPQFOMPPTFO
UIFBEKVTUNFOUCVDLMFTVDIUIBUJUDBOSFBDI
DPNQMFUFMZBSPVOEZPVSEPHTOFDL
g. 6)
Place sensor probe directly over the dog’s
WPJDFCPY8IFOCVDLMFEUIFDPMMBSTIPVMESFTU
directly behind the dog’s ears (the highest part
PGUIFOFDL
g. 7)
Note:.BLFTVSFCPUITUBJOMFTTTUFFMQSPCFTHP
UISPVHIUIFDPBUDPNQMFUFMZBOENBLFDPOUBDU
XJUIUIFTLJO
6TFUIFMPOHFSTUBJOMFTTTUFFMQSPCFTJGUIFDPBU
does not allow the shorter probes to reach the
TLJO
Before changing the stainless steel probes you
must completely discharge the collar by holding
a plastic handle screwdriver across both stainless steel probes for 5 seconds.
.BLFTVSFUIFNFUBMQPSUJPOPGUIFTDSFXESJWFSJTUPVDIJOHCPUITUBJOMFTT
steel probes and the unit is in the OFF position.
5SJNNJOHUIFIBJSBSPVOEUIFEPHTOFDLXIFSFUIFTUBJOMFTTTUFFMQSPCFT
XJMMUPVDIUIFTLJOJTPQUJPOBMDO NOTUSJNUIFIBJSTPTIPSUUIBUUIFTLJOJT
DPNQMFUFMZFYQPTFEBTUIJTNJHIUBMMPXGPSBOJSSJUBUJPOPSSBTIUPPDDVS
6TFBXSFODIXIFOBTTFNCMJOHPS
disassembling the stainless steel probes, do not
over tighten. (
g. 8)
STEP 3:$MPTFBOEMPDLDMBTQ
( g. 9)
STEP 4: "EKVTUGPSQSPQFSöUCZQVMMJOHPOTUSBQ
until you can t two ngers in between your
EPHTOFDLBOEUIFDPMMBS
g. 10)
Note: 7FSJGZUIBUUIFNBJOCPEZPGUIFDPMMBS
VOJUJTEJSFDUMZPWFSUIFEPHTWPJDFCPY5IF
DPMMBSTIPVMECFöSNCVUOPUFYDFTTJWFMZUJHIU
STEP 5: Let your dog wear the product for
su cient time con rming that they are moving
around normally. This step is to ensure that
under daily activity the collar will remain secure
and not become loose.
STEP 6: 3FBUUBDIDPMMBSUPZPVSEPH$IFDLUIF
t of the collar several
UJNFTQFSEBZ8JQFUIF
TUBJOMFTTTUFFMQSPCFTXFFLMZXJUIBEBNQDMPUI
while collar is in o position.
Reminder: If you choose to use a 2nd collar,
MFBTIPSIBSOFTTTZTUFNNBLFTVSFJUEPFTOPU
JOUFSGFSFXJUIUIFPQFSBUJPOPGUIF4VOCFBN¥
"EWBODFE3FNPUF5SBJOFS
READY TO USE
Note: The BATTERY INSTALLATION and COLLAR FITTING steps must be
completed before you are ready to use.
STEP 1:)PMEJOHUIFNBJOCPEZPGUIF4VOCFBN¥"EWBODFE3FNPUF5SBJOFS
JOCPUIIBOET13&44BOE)0-%UIF.BJO$POUSPM#VUUPOGPSTFDPOET
Note::PVXJMMIFBSBVEJCMFCFFQTBOE-&%TøBTIGREEN indicating the
device is on.
The default correction level is LOWUIJTTFUUJOHXJMMJMMVNJOBUFGREEN for
TFDPOETBOEUIFOUVSOPò%VSJOHUIFUFOTFDPOETZPVNBZUPHHMFUP
di erent correction levels by pressing the Main Control Button.
STEP 2:
4FUDPSSFDUJPOMFWFMCZQSFTTJOHBOEIPMEJOHBQQSPYJNBUFMZTFDPOETUIF
Main Control Button until a GREEN-&%JMMVNJOBUFTBUUIFEFTJSFETFUUJOH
gure 6
gure 4
gure 7
gure 5
gure 8
gure 9
gure 10
456