User Manual



5-68


Step 11: when you click the button, a range check is performed. If the range check does
not detect any error, the Confirmation dialog box appears. Click the Yes (Y)
button.
If a range error is detected, a message saying that a setting value is outside the
range appears.
Figure 5-23 Confirmation Dialog Box
5.9.1.2. Reset the AP
Resetting the AP-IFU enables the AP network parameter settings.
To reset the AP-RFU, on the Control (AP) screen in the AL Local Management Tool, click the
Execute button. A confirmation dialog box appears. Clicking the Yes (Y) button executes a reset.
Figure 5-24 Reset the AP